keithabc216v
-
Content Count
67 -
Joined
Everything posted by keithabc216v
-
thanks guys i ain,t getting the scales out to beat any hump backs
-
trying to change exhaust mani 2lt 16v 12m socket bit to big 11m wont fit anyone know what size these are please
-
supercharged it was lambda disconnected it didn,t blow fuse and it started so i,ve changed it and alls well i guess at least i only paid a tenner for the relay so thanks for your tips they have a 16v their dis mantaling at the vw audi dismantlers in sandwich kent which was handy for the relay would it be worth putting that up any where cheers for now keith
-
wiil do and thanks for that
-
thans for that the relay made no change checking lambda tomorrow fingers crossed got a spare so might be in luck
-
2.016v keeps blowing no18 fuse drove home went to go out hour latter no start trying fuel pump relay first guess it is easiest to change first any other ideas or past experiance from anyone
-
hi mine not as good as yours had to undo with pliers after pulling the rubber boot up mine were just crimped to the lead, bend crimped end just enough to slide off sounds a bit naff as mine were fixed no other way good luck keith
-
take of the end that goes to dizzy on number 4 slide on with little pins facing dizzy the sensor measures engine speed to the ecu via isv hope this helps
-
thanks for that would like to keep to 4 if i can
-
does anyone know if gsf93006 4 wire univ lambda fits 1992 2lt 16v 9a eng ok or any other places dont like vags £120?