dom
-
Content Count
123 -
Joined
Everything posted by dom
-
dont do just shocks or h& r springs anyone else
-
cool i,ll have a look there
-
think i am going to fit a koni t/a dampers and h&r spring just wondering cost and best place to buy from
-
cheers guys thats helped a bit it only seems to be the drivers side and that was the side that tightened up really easy sounds like i have over done it :oops: the nut below is that the pegged nut refering to
-
Getting mine done very soon vw specialist garage 2 hour job going to cost £90 including vat i am surrplying bushes 8)
-
fine handling feels a bit stiff when i turn to the right really need to get this sorted its, not stiff when first turn but it just feels difrent not in a good way
-
cheers for that tempest looks like i am going to be getting yellow pages out and ringing about, called to a mr tyres yesterday looked at me like i had two heads can do it if you raise it back up kind of defeating the purpose :roll:
-
fitted suspention yesterday dont think i have got the camber right were is the best place to get it set up ?lowerd 40mm well so i think bought second hand of ab standard shocks lower springs
-
Did mine today and my topnut was a 22mm walk in the park to do the rears bit of a bugger to get the nut off the fronts well tight so all in all a good day can anyone confirm when you tighten the nut back up shoul the cup still move tightened as far as it seemed or does it need tightning some more when you move the cup it moves the piston forgot to check before i changed stuff over :roll:
-
what was the socket set labeled as on the box may have a look around on net see if any still knocking around sounds very usefull 8)
-
hurray i have a solution to my problem hopefully get it done next sunday swap wishbones while i am there once i get them of jbob and other bits :salute: thanks for help there corradov6-nos
-
is that the same to put back on as well a mate as got a electric impact gun would that work?
-
okay going to have to make myself look like a idiot again looked on seach for suspention everything fine but how the hell do you get the top nut off while holding piston with allen key is it speical socket been to halfords at others car shops nobody got anything there did find a set of box spanners but not a 21 help :oops:
-
was thinking the same for mine except was going for 2l convertion engine dont smoke even if you boot it but it stinks terrible smells like oil then sometimes like exhaust posted thread but had no joy with help thinking may get whole engine start rebuild so if old engine goes straight back on road 8)
-
glad you got hold of matt at last mate went down last week no one about forgot to get back to you sorry about that
-
okay fitted a new handle a month or so ago when refitted door handle it opens door fine and everything but it dont lock the door alarm fitted is a clifford arrow 5 and it locks when you start driving the car alarms and everything but still able to open door when driving when stop to get out with ignition running can open door what have i done wrong :scratch:
-
http://the-corrado.net/.archive/forum/download.php?id=25269
-
httphttp://the-corrado.net/.archive/forum/downlo ... p?id=25269
-
http://the-corrado.net/.archive/forum/download.php?id=35832 found this picture for you hope it helps
-
i had the very same problem if you look under the car on both sides you can just see the clips that you need to push to get it to relise also i found that if you can get the front grill off or enought room to get your hand in you can push the clip only on drivers side does this work when you push the clips when underneath its just a case of feeling with your hands hope this makes sence to you
-
if i remember it is £15 or 17 from vag i had one a couple of weeks ago but can,t find paper work for part number
-
my oil light is fine dont come on oil level on dip stick on top mark c also seems to be running ever so tappey
-
hi guys For a couple of weeks the c as been smelling of burning oil when i check each morning it don,t appear to be using any oil could this be oil steams and seals also there is no smoke if i were to boot the c its a 1.8 16v its coming upto 150 .000 on the clock
-
no not got uprated wiring loom fitted yet i,ll check what you have surggested see what happens