trundlemouse

I have just bought a set of 17" 7.5 17" wheels The tryes fitted are 215/45/17 All are brand new Have fitted them to the car and the rear tyres rub on the bottom of the suspension cup (below the spring) The wheels will turn but rub. I have contacted the company that supplied them and they suggested fitting 5 mil spacers. I want to know if 1. This is correct 2. Will the tyres when they heat up still clear 3. Will the flexing of car still allow clearence. 4. If the spacers are an option then obviously the wheel nuts will need to be extended Or do 215 s' not fit on a vr6 The suspension is standard and ride height. please help as £420 later and my new wheels and tyres are sat in the garage

I have had the car 3 weeks now and the guy I bought it off supplied another heater switch (The whole unit) I replaced this and it still only works on 4 I have ensured that the metel strip is connecting as it should on motor switch. Any suggestions please

kevHaywire, Nice car. I have just aquired a 95 aqua blue 2.0 16v. I need to sort out the stance, but first I need to help fill the gap in the arches, what are the wheels and tyres sizes in pic 3 looks the dogs bo**cks

Aqua Blue 1995 Corrado needs wheels. I have just bought the above car and want to change the wheels, to 16'' or poss 17''. I am 37 yaers old and the car is standard and do not want a bling set of wheels, I just want the car to look right if you know what I mean. When I say poss 17'' rims I am not that keen on 40 series tyres ( Being a old Git and all that) they look boy racer for me. My main reason is for filling the vast void left around the tyres and the wheel arch. I may lower it later. Any pics and advice would be much appreciated

daves16v, Sorry Dave can you email the cost and paypal address for the door handles. If you email me at mailto:[email protected] I will see it before I get back on the forum Many Thanks

daves16v, dave can you send me a price for passenger side repair kit. New member and new owner of a Corrado many thanks in advance

Many thanks for your help

[color=#0000FF] :) Hello I have recently aquired a 1995 2.0 16v. I have a pretty good idea about the faults on the car. When I collected the car the passenger exterior door handle failed to open, I have seen repair kits on ebay ( In Germany and in the states) can anyone tell me if they work and if not what is the best route to take. Also the heater switch only works on postion 4 and the old owner has supplied the complete cluster temp, direction and switch. Does the whole unit have to be replaced. Any help gratefully received.