Matty Newquay
-
Content Count
80 -
Joined
Everything posted by Matty Newquay
-
Sorry it is a mk 4 polo! theyre just a set of coilovers i bought off ebay that are currently on my rado, just wanted to know if i could put them on a polo! Cheers
-
Ok will my coilovers fit onto a s reg polo i think its a mk 3 polo any ideas?? Cheers guys
-
Anti Roll Bar Bush's!!! How hard are they to replace? The drivers side on mine had split after being stood for a yr, i've done all the work for it to pass mot but this was a advisery, I'm wondering if theres a certain type that will make a difference or if its worth just sticking to the stock part! I've got coil overs on there front and rear and its dropped about 100mm on the front with 15inch bbs split rims with 195/50/15s on! Any advice would be awsome Many thanks Matt
-
Cheers dude! Yeah hopefully it should pick up soon though! Maybe this weekend!
-
Some cheesy r+b vid i had to borrow a music dvd off a mate abd its full of r-kelly and people like that! Just wanted to show it working really!
-
Well its defo worth thiking about! I'l have to search for some tuners down this end of the country!
-
Lol no i dnt wanna spend all that!! So if i sourced a 2ltr bottom end would i need to also get the ancilliaries off that engine or will mine just bolt into place!! Where is this stelth place?
-
Had a go at putting a screen in the center console i think it looks ok! Wat does everyone else think?? Taking the center part out! Cutting enough space for it to fit into!! Part removed! Then fitting it back into car! I located the dvd driver on the shelf under the glove box! It took a little cutting! Now it all works fine. Yes i know i need a black headunit! The silver one stands out so badly!! Cheers
-
How much work does that involve? And what needs to be changed to put a different bottom end on? Cheers
-
Cheers for the advice! I relaced the coil and all the leads and rota arm about 2 months ago so they're all good! Same with wheel alignment, thats was all set up after i changed back to 15's cos i dropped it some more. Any ideas wat a 1800 valver should roughly be producing bhp wise?? Cheers
-
Okay i was just wanting some advice really! I have had my rado for about a yr now and just want to make her a little faster! I've gone back to bbs 15 inch wheels so its a litle faster off the mark! I have a k+n pannel filter with a driled air box A straight through stainless exhaust from mainfold to rear silencer i think its 2.5 thick Is there any other simple mods i can do to improve the performance? Cheers guys
-
Hey man thats pretty much the same as mine! And u will fully notice the differance! Mine is only for main or full so i put it on main and its almost better then the full beam! Alot brighter! And also super easy to fit!
-
Mine is a j plate and is only a 1.8 16v! I also need a new passanger wing so which one's will fit??? Cheers
-
I have a set of hocks on mine now! But the off set is either 35 or 38, i have coil overs so its lower than a 40mm drop, but because of the rubbish off set i'm having to run 10mm spacers so the weels will clear the coil overs inside the arch! its fine on the rear! But i wanna go lower on the front but beacause of the 10mm spacers i cant! Sorry just had to have a winge! oh yeah tyres are 205 40 17 on the front And 215 40 17 on the rear! And i'd say the drop ive go is between 70-80mm
-
Can someone explain to me how the air box works in the 1.8 16v Rado?!? I mean gubbins that come off the top of the box!?! Cheers
-
Has anyone ever tried to seal a cone filter underneath the top part of the air bx! So u could totally remove the bottom of it??
-
Has anyone ever tried fitting harness's to these seats? (normal corrado seats??) I didnt realise u had to totallyremove the seat to get to the clip part of the seat beltS!?!
-
Do u think that will sort the problem??
-
Its a 1.8 16v! The breaks keep going spongy after about a week of bleeding them almost to the point where they dnt work at all even after i pump the pedal loads! so just wanna fix it rele someone said it most prob themaster cylinder! Just wondered if its the same as a mk2 golf!
-
Does anyone know if a brake master cylinder from a mk2 golf fit my 16v corrado! j reg? Cheers m@tt
-
Um How hard is it to fit a new master cylinder?? And also will one off a mk2 golf work??? I wanna replace then servo and the cylinder as a whole unit! Anyadvice?? Cheers
-
I know this thread is super old! But how hard is it to change the master cylinder??? I'm pretty good at doing most things but never tried this??? Cheers!
-
Mine too! Hammerite but i used yellow!!!!
-
Cheers people! Took the mounts back to the shop today and said they didnt fit so well and showed them the old one! They gave me 2 new mounts with the bearings and all! For the ones they gave me orignally even thought they looked used !!! Sweeeetttt! Now sorted it drives so much better iwith coilovers! A tad bumpy but sticks to the rd so well! Also running 10mm spacers!
-
Our Silver valver 9A converted(coming back)
Matty Newquay replied to vardo's topic in Members Gallery
Man i want those wheels!