__Andy__

quick update, audi has now gone..corrado is in the garage getting some love. new tie rods and ends with 4 wheel alignment, slimline rad fan fitted, wiring looms re-taped, full service, few little niggles addressed and then an mot..hoping it'll be back next week.

could i get a set for a 55l tank please?

late black cloth recaros's, american spec heater controls..fuse box clips, immaculate late fogs and indicators, 2x brand new vr rad cover's, theres more in the stash somewhere too!

no problems, let me know when she can collect. ---------- Post added at 9:05 AM ---------- Previous post was at 9:04 AM ---------- bump..this has to go soon otherwise its all going to be binned :(

starter, coil, throttle body, leads all gone..

As title then guys im after a set of silicone coolant hoses for my 9a engine. ive had a little search online and it appears samco offer a kit under the number TCS425/C in the us, its an 8 hose kit listed for mk2 golfs with engine code 9A and PL. i know the KR kits are available however not all the hoses are suited to the 9a. So the question is where can i get a full set from? any ideas? thanks in advance. Andy

If I still had the vr.. Bill if you find any for a 9a please let me know.

As title then i have 4x vr6 coolant hoses all in very good condition, complete with clips also in very god condition. Please not this is not a full set of hoses. the top rad hose is not present as i needed this for my vr, i believe the rest of the hoses to be the 4 main hoses. pics will be up as soon as i can get the uploader to work. id like £35 plus postage for all 4 hoses. collection from lee on solent would be ideal tho can post if need be. Regards, Andy

so today i spent all afternoon clearing out my folks garage and shed's of all the spares ive accumulated over the last 6 years, found some bits i need and an absolute shed load of stuff i dont need! not much has happened on the car front, however i took the cover off and started the car for the first time in an eternity, started first turn of the key and is a smooth as the day i finished the engine build. Ive been putting this off for some time as i thought i had a dodgy sunroof seal and was worried what might be lurking inside the car...luckily the seal is fine and the recaro's are still immaculate..happydays! I've started putting together the last few bits i need for powdercoating and finishing off the engine bay. Am hoping to have it back on the road soonish.

no problems. ad amended

updated with parts taken.

no probs, the scuttle cover is the small corner piece that covers the right hand side where the inlet for the heater box is, just incase you thought it was a complete cover. Tuesday eve would prob be best for me if thats ok.

So am having a big clearout and to make things easy all the following parts are free to a good home. There is a shed load of parts here all in gd condition unless otherwise stated. most engine parts etc are from an early 16v kr engine, the rest would be compatible with most corrado's.. best to look through the pics and see whats there. id like these parts collected from lee on solent, i dont have enough spare time to package and wrap all the bits for postage..especially when im giving them away. heres a rough list of whats there: Front wheel arch liners Space saver 4x100 Early front bumper and iron Early slam panel 2x Boot liner trim (Scuttle cover, seanl) (Pair of seat runner trims,seanl) Leather gear gaiter Momo Gear knob Early heater controls Various dashboard ducting Coolant hose's, various all from kr and 9a engines Power steering hose Vaccum hose Header tank KR exhaust manifold Battery leads (Late 3 slat grill, all bottom locating tabs in tact, all top 3 fixing tabs missing..otherwise grill itself in very gd condition,seanl) Wiper linkage and motor (front wiper motor,seanl) Rear Wiper Motor Starter motor, from a KR engine. housing badly corroded though working perfectly upon removal..if i had the time id clean this up and give it a paint. Sunroof motor, iirc this came with my b4 passat moonroof, therefore im not sure if it is suitable for a corrado..have taken a close up pic of the part number. KR Metering head/with air box lid, gd working condition. 2x Vaccum breather's again both from a KR engine.. Fuel lines, Kr engine..almost two complete sets, one set in good condition the other set a little tatty..some injectors present however not a full set. HT Leads, KR engine, Hella silicone leads in gd condition. Ignition coil, KR engine, good condition Sound deadening, original taken from an early 16v Throttle cable, KR engine Radiator fan shroud, lots of surface rust..this may or may not come with fan and motor as im not sure if i need this yet. Sunroof seal, interior seal, grey Bonnet catch, surface rust, re-usable Oil filler cap Expansion tank cap, blue g12 spec Dash vent 4x Interior grab handles 2x Rear chrome vw badges, sadly both tabs broken off on both badges, chrome in vgc..both with backing rubber. 16V rear badge 2x Bonnet release handles 2x Seat tilt surround trims 3x Switch surrounds, iirc for spoiler switch, possible early pass window switch Interior mirror cover 4x Rear seat belt cover's Footwell vent Accelerator pedal bump stop and trim (2x clear side repeaters, aftermarket, seal) 2x orange side repeaters, original, broken clip 2x Rear bench foam's, sit under rear bench between rear quarters Headlight ballast 2x Front seatbelts 1x Rear seatbelt Rear boot light 2x Early interior door pulls KR Throttle body, good working order.complete Assortment of mk3 dash parts, switch's stalks, heater blower motor, pic's to follow asap once i can get the uploader to work! All of this to be collected from my folks place in lee on solent po13, all of this has been stored there for the last 5-6 years and its time i gave them the space back. If theres anything you want just let me know. Regards, Andy

I think I've got some somewhere, will have a dig around

Any chance of stainless bolts for a valver? I'm really after the lower inlet manifold Bolts plus any others that are available. Cheers, Andy

mines a late valver so doesnt have the wide track like yours, you might not need as wide adaptors.. id say have a look at the wheel whore's website and do a general google search for corrados running d90's... in the meantime heres a link to my members gallery thread, it might take you some fishing through the pages tho as there's all of my corrado's in there aswell as a few diff sets of wheels... pics of the d90's will mostly be with the alpine valver. hope this helps buddy!

In-Tank Lift Pump - £20 lift pump - £15 have you got any pics of the above? also i presume the pumps didnt 'buzz' when on the car and running? cheers, Andy

I'm running 8j all round on kw variant 2 coil overs..iirc 35mm h&r adaptors all round. I originally ran the d80's on 205/45/16 falken tyres but now am running on 205/45/16 dunlop sp2000's..I've never had any arch rub or issues with this set up. Is your car 4 or 5 stud? As the later 5 stud cars have a wider track then the 4 stud cars. There should be plenty of pictures in my members gallery thread. I will be changing to 195/45/16 tyres soon tho as I want to space the wheels a bit more. Hope this helps, Andy

Ok, here's the part numbers I'm after: 051 260885a 027903133e 049903103b 357 711 188a 357 199 356 357 199 353a If anyone's got any of these please let me know. Cheers, Andy

ok thanks rod

as title then im after some good condition 16v engine brackets... forgive my vague descriptions but the one's im after are the alternator tensioner bracket, the water pump/alternator mounting bracket, the complete mounting brackets for the pas pump and the long gearbox bracket.. ill try and find part numbers and pics of what im after to make it easier.. as good a condition as possible altho they will be blasted and powder coated so dont mind if they are a little rough. Cheers, andy

Tail gates an option yet Andy?

Huge thumbs up from me.. Roof's look brilliant..

ive got an early one in ok condition you can have for free..will need to be collected though.

lemforder all the way