Yabble Dabble

Sadly, not a clue.

I went through Heritage Parts Centre. The first one delivered was ruined in transit and they were very prompt in sending a new one - no need to return the old one - for no extra charge. It was better packaged. I took photos throughout of all the boxes etc. Really impressed. Cannot confirm it was VAG OEM but keeping fingers crossed. Good luck.

Just finished after about 12 hours ... I have replaced the hoes in the paddles with Aquarium filer and sticky aluminum tape ... we shall see. Regarding the wire loom around the fan arm/duct - I found it easiest to unclip the 3 fuses (if that is what they are - 79; 179 and 179 - to release the duct. Now very knackered.

Thank you for your reply, that looks great. I am assuming it will do the trick - my car is a '94 Corrado VR6. By the way, I also assume it is flat - only the garage - Clover Autos - pointed out that the plastic one that I have keep warping and if I do find a metal replacement, that it should be flat. Would you PM me ? Kind regards Toby

As in the title ... would like to get hold of a Metal Rocker Cover. The original plastic one is turning into a banana ... important number is 021103475 G for ABV VR6 engine. Anyone able to help out ?

PM Me, please.

mine is a 94 VR6 - do you have a price ?

Do you still have it ? if so, how much ? I am looking to replace 535837205 A, does the letter matter ?

Thanks for letting me know. I am still interested if you get to know of one being available.

Do you have a flat (not boomerang style) rocker cover 021 103 475 G ? It must have a groove for an ABV 2.9 VR6 '94.

Do you have a flat (not boomerang style) rocker cover 021 103 475 G ? It must have a groove for an ABV 2.9 VR6 '94.

Do you have a flat (not boomerang style) rocker cover 021 103 475 G ? It must have a groove for an ABV 2.9 VR6 '94. Will pay postage.

Do you have a flat (not boomerang style) rocker cover 021 103 475 G ? It must have a groove for an ABV 2.9 VR6 '94.

Looking for a replacement Rocker Cover with Groove to take Gasket - Back in Sept 2015 got a Rocker Cover installed to replace Boomerang shaped version. Understand that the replacement was flush and not grooved. Worked well for a bit then started slow trickle of oil. Need to keep topping oil up and want to replace with flat (non-boomerang), grooved correct cover during June half term. Thanks for any help.