vagingit.co.uk

Im just wondering sbout thd compatibility of the two. Will a G60 exhaust be ok on a 1.8 valvet? Both cars are early spec Thanks

If Goozie doesn't want it, and you are willing to post. I would gratefully receive the bonnet catch and bolts

Over the yers, 3 Corrados have passed through mine and the other halfs ownership.Two 16Vs, and a G60. All of them ended up in a bad way through no fault of ours. Ive now got a 4th as a rolling project to restore/and generally tinker with. Its an early 16v I bought from Steve (TWIN45) on here. Its was generally very solid and straight, just needing a little TLC. I bought it primarily because I had never seen one in this colour before. The paint code matches Dark metallic green in the paint code list,but sometims it looks quite grey. All electrics work, including the sunroof sliding. Lowered on coilovers Stainless exhaust which I need to change as I cant find where its blowing And now it sits on a set of Sebrings. Here it is after an intensive 6 hours paint correction And on the Sebrings This shows how well the paint came up and what the colour is like in the sun Ive also repaired the drivers seat using a mint passenger seat Steve included in the sale I just need to swap the tilt handles and cables over now. Plans are to get the Sebrings refurbed in a slightly different colour, clean and detail the engine bay, then just enjoy it.

Anyone have anything?

How much would you like for the polished 16v rocker cover posted please?

The upper bolster on my drivers seat is torn. I do however have a mint passenger seat spare. Can I just swap the top over? I know it bolts on fine, but what about the tilt lever? Is there a cable and attachment for the lever on with sides? Can I just cut the fabric, then put the surround and tilt lever on the other side so that the tilt lever is on the outside like it should be?

Definately sold Thanks for all the interest

As in title guys preferably stainless, but would consider a very good standard steel Im in Kent Thanks

Back up for sale

Provisionally sold.

Pics of the inlet manifold please

Location: South East Kent Please pm or text as I work nights. Simon: 07958542736 I have a set of factroy fitted G60 BBS RZ alloys for sale. Just the wheels, no tyres, and only three centre caps. The wheels themselves are not in bad condition. Two are quite good, one has a small amount of kerb damage which can be seen in the second to last picture, and one has suffered some corrosion damage. All four have minor marks as you would expect from a set of 20 year old wheels. I would like £100 collected for these, or £130 delivered

Thanks for all the replies and emails. I pick up a nice early valver tomorrow Cheers guys

I am after two sebring alloys, with or without tyres. I am not worried about condition, but they must be straight and useable. I would consider a whole set if the price is right I am in Kent, so postage will be needed

I think a VR6 may be out of budget really. Feel free to send me some details via pm though Thanks

Im looking for a Corrado 16v 'project'. By this I mean a runner that can be driven home, but needs work. Either a 1.8 or 2.0 will be considered. I am in South East Kent, but will travel.

Cheers for the offer Chris, but this will now be a straight sale as I have secured some new wheels I am open to offers on these guys

Please pm or text as I work nights Simon: 07958542736 Price £300 ono Location: South East Kent, but I will be more than happy to wrap them up and courier them I have a set of 4 Borbet A alloys. 16" by 7.5" in 4x100 fitment They are not in the best of condition. All have superficial kerbing and a couple of flat spots in the outer rims due to pot holes etc. There is one larger 'chunk' missing from one rim, which looks like it has been filled in the past (third picture down) They do, however, all run true and balance up absolutely fine. I have been using them for a few months now with no issues at all. They have been rattle canned in ford beige/cream. Again, not a great job, but then, chances are you will have them refurbed. They look ok on the car, but close up you can see that they are slightly different shades even though the paint came from the same place. 4 centre caps are included, and I think I have a spare one somewhere too which I'll throw in. 4 useable tyres in 195/45/16 size. The rears have reasonable tread for a few more miles, the fronts have covered around 1000 miles. Budgets on the rear, Nankangs on the front. One front tyre has very light scrub marks on the outer edge, but nothing to worry about. I am open to offers of a part exchange with another set of 4x100 alloys either 15" or 16" size and preferably with tyres

I have a set of 16"x 7.5" Borbet A's with tyres for sale if you would be interested in a trade with a little money my way?

Will you wrap up and post the single G60 BBS? If so, I'll take it

I only need the bases of the seats, not the uprights, will you sell them seperately? Would you post the bases? Thanks

Are both the bare Corrado subframes height adjustable? If so, Id be interested in taking them. Can you pm me your postcode so I acn see exactely where you are in Battersea Cheers

I'm having trouble tracking down a de-cat pipe for a G60 Will one for a VR6 fit ok? Thanks

I'm after a g60 de-cat pipe Also after the gearbox weight that's at the front of the gearbox by where the cables clip on I think this will be the same on the vr6 gearbox Anyone help with these parts?

Hi, does the decat pipe come with a lamda probe? Will you take £30 posted for it? Cheers