Jump to content

jma

Members
  • Content Count

    55
  • Joined

  • Last visited

Community Reputation

0 Neutral

About jma

  • Rank
    Newbie
  1. Hi All, I am thinking of doing a Honda K20 / K24 engine swap for my Corrado VR6. Anyone have any ideas of if this is possible and how much it would cost. Thanks
  2. jma

    Heater Matrix Blow out

    I will change it, your right its radiator elbow that goes to the top hose can these be bought?
  3. jma

    Which Coolant?

    gsf/ euro only stock the blue, should it be G11? thats what I have read. Cheers
  4. Hi Had the heater matrix replaced today the chap who replaced it used a Valeo. Just have another issue found another leak and this seem to be coming from the thermostat housing and I have not driven it. Guys I will be replacing the thermostat housing but at the same time should I put in a new thermostat and the temperature sender? Also forgot to mention the metal pipe that goes into the top of the radiator has a small pin size hole can this be repaired using a metal hardener paste? Having spoken to the mechanic who replaced the heater matrix today he said due to the thermostat leak this must have created an air lock in the system and cause the heater matrix to blow. Well it was a 20 year old part no bad really. Your comments are appreciated
  5. jma

    Which Coolant?

    Hi Guys I have replaced my VR6 heater matrix which coolant should I be using red or blue? Thanks
  6. jma

    Heater Matrix Blow out

    Also forgot to mention the metal that goes into the top of the radiator has a small pin size hole can this be repaired using a metal hardner paste?. Having spoken to the mechanic who replaced the heater matrix today he said due to the thermostat leak this must have created a air lock in the system and cause the heater matrix to blow. Well it was a 20 year old part no bad really.
  7. jma

    Heater Matrix Blow out

    Hi Had the heater matrix replaced today the chap who replaced it used a Valeo. Just have another issue found another leak and this seem to be coming from the thermostat housing and I have not drove it. Guys I will be replacing the thermostat housing but at the same time should I put in a new thermostat and the temperature sender? Your comments are appreciated
  8. jma

    Heater Matrix Blow out

    I have been quoted £150 supply and fix for the heater matrix does this seem right. The mechanic has been recommend by my friend who has a camper van and has been using this guy for 6 years.
  9. jma

    Heater Matrix Blow out

    Jon To be honest I dont have the tools and a bit worried I may mess it up!
  10. Hi Guys, Took the car for a spin on Saturday being that the weather was awesome its been garaged for 6 months. After I parked it up there was steam/mist and noticed water in the driver side footwell. I know its the heater matrix does anyone know a recommended mechanic in Birmingham to fix this problem and how much it may cost. Also advice on which make of heater matrix is suitable, the control on the blower only works on 4 would it be best to get this looked at the same time as the heater matrix. Your help is appreciated.
  11. jma

    Bump Strips

    What work wonder is using white sprit they use to clean brushes. Soak some of the white sprit on the cloth and apply it to the adesive left behind, make sure gets through leave it for 10 minutes and just rub it down with the same cloth dont worry it doesnt effect the paint and no scratches!!
  12. Hi All Took the car for a spin today as it was sunny, parked the car and came back to find a small scratch on the bumper :mad2: My VR is twighlight voilet and I think the paint code is LC41, does any one know where I could get a touch up pen?.
  13. jma

    Engine ticking sound

    I have checked the oil and its at the right level, I had a oil change and I used the 10 40 oil. The noise isnt loud it just that I get paranoid with the ticking sound. As long there is no damage to the engine I guess i have to live with it and sort it out in the near future. :)
  14. Hi I have a 1994 VR and there is a ticking sound from the top of the engine (left hand side next to the air box). I believe it may be the tappets or lifters is this something I should be worried about or is its common on a engine which is 16 years old, I dont want the engine blowing up, will be blow up? :cuckoo: . Sorry but I get paranoid when it comes to engines, last thing I want the engine dying on me. Your help is appeciated.
  15. jma

    Lenso BBS Style

    Dukest, thank for the reply any ideas on how much would it cost for a set of 205/45/16?. I have attached photographs of my vr.
×
×
  • Create New...