jma

Hi All, I am thinking of doing a Honda K20 / K24 engine swap for my Corrado VR6. Anyone have any ideas of if this is possible and how much it would cost. Thanks

I will change it, your right its radiator elbow that goes to the top hose can these be bought?

gsf/ euro only stock the blue, should it be G11? thats what I have read. Cheers

Hi Had the heater matrix replaced today the chap who replaced it used a Valeo. Just have another issue found another leak and this seem to be coming from the thermostat housing and I have not driven it. Guys I will be replacing the thermostat housing but at the same time should I put in a new thermostat and the temperature sender? Also forgot to mention the metal pipe that goes into the top of the radiator has a small pin size hole can this be repaired using a metal hardener paste? Having spoken to the mechanic who replaced the heater matrix today he said due to the thermostat leak this must have created an air lock in the system and cause the heater matrix to blow. Well it was a 20 year old part no bad really. Your comments are appreciated

Hi Guys I have replaced my VR6 heater matrix which coolant should I be using red or blue? Thanks

Also forgot to mention the metal that goes into the top of the radiator has a small pin size hole can this be repaired using a metal hardner paste?. Having spoken to the mechanic who replaced the heater matrix today he said due to the thermostat leak this must have created a air lock in the system and cause the heater matrix to blow. Well it was a 20 year old part no bad really.

Hi Had the heater matrix replaced today the chap who replaced it used a Valeo. Just have another issue found another leak and this seem to be coming from the thermostat housing and I have not drove it. Guys I will be replacing the thermostat housing but at the same time should I put in a new thermostat and the temperature sender? Your comments are appreciated

I have been quoted £150 supply and fix for the heater matrix does this seem right. The mechanic has been recommend by my friend who has a camper van and has been using this guy for 6 years.

Jon To be honest I dont have the tools and a bit worried I may mess it up!

Hi Guys, Took the car for a spin on Saturday being that the weather was awesome its been garaged for 6 months. After I parked it up there was steam/mist and noticed water in the driver side footwell. I know its the heater matrix does anyone know a recommended mechanic in Birmingham to fix this problem and how much it may cost. Also advice on which make of heater matrix is suitable, the control on the blower only works on 4 would it be best to get this looked at the same time as the heater matrix. Your help is appreciated.

What work wonder is using white sprit they use to clean brushes. Soak some of the white sprit on the cloth and apply it to the adesive left behind, make sure gets through leave it for 10 minutes and just rub it down with the same cloth dont worry it doesnt effect the paint and no scratches!!

Hi All Took the car for a spin today as it was sunny, parked the car and came back to find a small scratch on the bumper :mad2: My VR is twighlight voilet and I think the paint code is LC41, does any one know where I could get a touch up pen?.

I have checked the oil and its at the right level, I had a oil change and I used the 10 40 oil. The noise isnt loud it just that I get paranoid with the ticking sound. As long there is no damage to the engine I guess i have to live with it and sort it out in the near future. :)

Hi I have a 1994 VR and there is a ticking sound from the top of the engine (left hand side next to the air box). I believe it may be the tappets or lifters is this something I should be worried about or is its common on a engine which is 16 years old, I dont want the engine blowing up, will be blow up? :cuckoo: . Sorry but I get paranoid when it comes to engines, last thing I want the engine dying on me. Your help is appeciated.

Dukest, thank for the reply any ideas on how much would it cost for a set of 205/45/16?. I have attached photographs of my vr.

so would you suggest that i just stick to a set of '15's ?

Just checked the width of tire its 205mm which makes it 8.07 inches. I have the standard speedlines on my vr which is 205/50/15. So will the Lenso's fit even if the car is lowered and is it true that its hard to get hold of '16'inch tyres and they may be more expensive than you '15' or '17' as its not a common size? :?

Cheers I will find out out and let you know. :D

Cheers for that info, the wheels are the following Lenso BBS style alloy wheels & 205/55/16 tyres,Wheel spec is, ET28, 5 stud, 100 pcd. My question is that if I were to take the existing tyres and put on 205/50/16 or 205/45/16 would these still fit or is it a option to settle for 15 inch alloys. Could invest in some coilovers but dont want to spend anymore money as the Bilistein are doing the job nicely. :D

Hi I went to see these Lenso '16' BSX yesterday they looked sweet. My car has been lowered with bilistein shocks and springs and I tried one of the wheels on rado they are quite large and were rubbing under the arch. Can you guys suggest what i should do as I was advised these would fit easily. My heart is set on these Lenso's as they would give my rado a facelift :D .Cheers

Hi All I have bought a pair of late front foglights for my VR6, these have been tinted/painted back. Anyone know how to remove this as I would like to put yellow laminex film on them. Cheers

Hi All I have seen some Lenso BBS style alloy wheels & 205/55/16 tyres,Wheel spec is, ET28, 5 stud, 100 pcd. Will these fit onto a 1994 VR6. Cheers.

Hi My friend has brought a VR6 and I noticed that a couple of wires around the engine were not connected. Can anyone advice me what these are as it will need attention. I have attached a photo with red clound highlighted. Cheers

What do you mean? :brickwall:

What do you mean by raw? :?