jma

I have a Kenwood Unit and would like to fit in my Corrado. It has standard iso leads but it does not power up!. Do I need to buy some leads or could it be the fuses?

How do I unbolt the glass? sorry for being silly there always a first time for everything! :brickwall:

The window scrapper has a gap in the middle, its quite difficult to get in there. Is there a way to wind the glass past the trim as it is in the way. How do I adjust the window regulater. Cheers

Hi I am trying to fit the window scrappers that fit along the outside of the door (I did not have any fitted I bought the car). I have removed the door cards and the inner window scrapper. I have fitted the drivers side but it does not fit tightly against the window (when glass is down its perfect tight against the glass but when the window up there is a gap its getting on my nerves!. I am trying to remove these and the problem is I cant take them off :mad2: :mad2: :mad2: . Please could anyone advice me on how can I remove these!!!!

Hi I am trying to fit the window scrapers that fit along the outside of the door (I did not have any fitted I bought the car). I have removed the door cards and the inner window scraper. I have fitted the drivers side but it does not fit tightly against the window (when glass is down its perfect tight against the glass but when the window up there is a gap its getting on my nerves!. I am trying to remove these and the problem is I cant take them off :mad2: :mad2: . Please could anyone advice me on how can I remove these!!!!

Yes its both the Honda I am looking at the EK9 & DC2 JDM import only. :D :tongue:

Hi I am keep my Corrado Vr6 as a weekendcar and thinking of buying a Honda Civic Ek9 or Integra DC2 Type R as a daily drive. Which one should I get? and if compare the VR6 to the Honda Civic EK9 /Integra DC2 which would win in a race? :D

Hi Guys, My mate has some beautifull bbs staggered splits rims, I was wondering would these fit my rado :scratch: or do I need adpaters. Cheers

Clear repeaters and new 90 mm splitter Hi, where did you purchase your splitter?

I will try this, it may be the reason why my spoiler is not working. :scratch:

Hi I have taken my old tape stereo out and would like to fit a Kenwood Unit. I have connected the existing to leads to my new kenwood unit but it does not work. Do i need to purchase a set of adapters? :scratch: Thanks

Brown on white that a combination :)

I think green is the slowest :lol:

Hi Guys, Just wanted your opinions on which is the best and fastest colour? I think twiolet purple! :clap:

Can I change the blue temp sensor or do I need to take it to the mechanic? and how would I cleam the idle valve? Cheers

Where is the blue temp sensor and idle valve?

Sorry it a VR6, it splutters sometimes idles normaly.

Cheers for the help, at least I know I will be doing its right :clap:

Hi How do I change my spark plugs? new to VR :brickwall:

Hi I seem to have a problem, when I start the car it seems to be running lumpy/misfiring. What should I be doing to to diagnose the problem? your help is apperciated.

Hi Just bought my front engine mount for my VR6 but also need a limit stop this is the metal cup which supports the rubber mount. Anyone got one or where I could locate this?

Hi I have managed to located the front engine mount, but where can I find the metal cup the supports the mount from below. This cup has 3 bolts and fixed to the underside of the frame. Does anyone have one spare or can I get it direct fom vw? Cheers

Hi I seem to have a slight oil leak, it has been diagnosed as the seal around the crank sensor can someone advise where I could get these from and part number. Thanks

Hi I need to replace my VR6 front engine mount does anyone know the part number. I have checked mine it seem it is supported by the cup which is fixed by three bolt to the chassis. I did speak to gsf but dont know whic one will fit and need a part number. Your help is appeciated. thanks

Hi My heater control only works on setting 4, what could be the problem? easy fix? :?