brettski

Oh sound when I repainted my raddo earlier this year couldn't get hold of any at all tbh and there were ones on eBay for like 70 quid but no way I was paying that lol

Well good luck with them as when I tried to get hold of some there like hens teeth and they are prolly repro rubbish fitting parts

As title says passenger external window scraper perfect condition no bends or anything £40 posted

here for sale is my dragon green corrado 2.0 16v 92k miles on the clock I have got service history to back up it is genuine mileage engine is very smooth and quiet for a valver I bought this car in april this year as a project as it had been sat in a garage unused since early 2005 only problems it had was it needed a full repaint due to laquer peel on nearly every panel witch has now all been done and the paintwork is all sorted and immaculate since the car has been on the road (july this year) I have replaced or renewed .cambelt and tensioners 88k only done 4000 miles since replaced .disks and pads all round inc rear wheel bearings .full service inc plugs leads dizzy cap filters etc etc oil has been changed 3 times in 4k sounds over the top but if you look after a car it will look after you .fk coilovers all round with new top mounts bearings track rod ends and a full geo check so drives perfect no pulling or anything of that sort .neuspeed front arb essential if you want to run a corrado low as we all know the standard fouls the chassis and also improves handling .milltek stainless exhaust manifold decat and full exhaust system bought brand new from awesome gti about 3 months ago made a real improvement to the response and torque of the 16v lump and is nice and quiet on the motorway but sounds awesome when you go through the gears .usa spec front indicators and side markers .full grey leather interior in very good condition minimal wear to drivers bolster .cat 1 toad alarm with total closure inc two fobs .17x8.5 bbs reps like new only 3 months old wraped in brand new only done 500miles nankang 195-40-17 tyres .projector headlights (not chavvy angel eyes)and badgeless grill everything works as it should with no running problems or issues and the car is rust free and never been welded this is one of the cleanest corrados underneath I have ever seen and is one of the main reasons why I bought it car is taxed till the end of December and moted till july next year went through the mot with no advisory's and passed the emissions with flying colours I will be gutted to see this car go but due to me changing my job and needing to do motorway miles I cant afford to keep it and it will be a shame to put miles on such a good example if you have any qs just contact brett on 07544493788 the price I am looking for is £2400 o.n.o I feel this is reasonable price for the spec and condition of the car will post more pictures tomorrow thanks for looking hope she goes to a good home who will look after her like I have :)

bump offers?

here I have for sale 2 x 16x7 5x100 and 16x6.1/2 4x100 all the wheels have been split and acid bathed and ready for paint powder coating or whatever takes your fancy all come complete with bolt but no centre caps. one of the 7 j wide barrels has a bolt snaped in it and one of the 6.1/2j barrels has a bit of curb rash but all are straight and true with no flat spots I am looking for 45 each ono located in skelmersdale Lancashire 07544493788 brett any qs just ring or txt me on the number above cheers brett

Hi has my colum and lamba sensor been posted? Tried to contact you via pm but no reply?

Also forgot to ask if you don't end up selling the engine loom I need the lamba sensor loom with both plugs male and female and a short length of loom if that's at all possible regards Brett

would you do the metering head for 60 posted regards brett

Would this fit a vr6 golf obd2 thought use ask as I am not well up on the vr's as it's for the girlfriends mk3 golf

Well reason being my valver has everything a vr has except the engine tbh and it's had a full repaint and is totally rust free and low mileage I just love have put that much time into my valver that I would prefare to put a vr in it and whilst it is out I can repaint the bay the engine etc and it will be mint and I know exactly what's been done to it for my own piece of mind If that makes sence

that will be awesome dude cheers :)

hi there just gathering info about converting my valver to a vr6 what are the dos and don'ts? and in past experience with please don't shoot me (the Vauxhall scene) I have done many a conversion and had to uprate fuelpumps etc on my valver I know there is an intank pump and an inline do I have to change these for any specific pump or are the standard onse capeable of coping with the vr6 any help much appreciated thanks in advance brett :)

I need pretty much everything tbh dude so if you have a loom ecu waterpipes etc etc I may have an engine and box but if you have that too will consider it

I am located in skelmersdale Lancashire wn8 postcode where are you dude?

looking for a full vr6 conversion so peeps w.h.y?

Wanted a neuspeed or similar front arb for my corrado thanks in advance Brett

Nice 1 dude that's filld me with a bit more confidence now I was dreading having to remove the subframe

Can anyone help or guide me in the correct direction I have bought a Milltec manifold and I am not sure if I have got to drop the subframe to fit it or if its possible to do it without any help would be most gratefull thanks in advance Brett

ok dude pm me the actual price and your paypal please an i will send money over asap cheers brett

45 and al have em

whats the best you can do on the fuel pump posted?

were are you located

went to this today was a good show and is very local to me I was in my dragon green corrado on a bmw stand off all things if anyone spotted me must say some lovely motors on the corrado stand good work boys :')

Well I think I have sorted mine turns out my dizzy timing was to far advanced I have retarded it by a couple of degrees and its now ticking over steady at 850-900 rpm