gingernuts

bump need this gone. offers

no worries here are a couple

Ok, i guess having the price in the first post and the reply isnt enough. ;)

No interest in this at all???

top

as above

As title, new and unused. Had this made for my race car but need money to finish the car so am just going to use my metal bonnet. Its single skinned and very very light ( Its quite flexible so may need bracing depending on how you mount it. Its unpainted on the inside and gloss black on the outside. Pictures to follow (Im offshore at the moment so depends how long it takes my dad to figure out how to use a camera! Located: Central Scotland Contact: [email protected] Price £300 + post. (will be very hard to post so will be at owners risk)

any body??

Ill take on of these in fibreglass. Do they come in black or white??

I'd be in for a bonnet late wings and poss a tailgate pending prices. Material doesn't matter, lightest possible please!

Corrado dealer option thule roof rack. Has sliders for ski/bike rack as shown (ski rack not included). Clamps round above windows, two 6mm alan keys to tighten (takes 2mins to put on and fits in boot). Only bad bit is missin keys (can be bought as far as I know), and pads have been replaced with tyre inner tube around legs (will put close ups as soon as I'm home) I was going to tidy it up but it's not that noticeable! Price wise, I've never even seen another one of these for sale, looking for £100. Can post Located in central Scotland (Perth). Will add proper photos when I get home tomorrow.

im interested if you could send me some pictures to [email protected] cheers

VR6 | burgundy | perth scotland Price: £4000 Description: tax: till aug '12 mot: 5 months left i think (will double check) mileage: 148,000 (dont let that put you off, most stuff has been upgraded or replaced!) location: perth, scotland phone: 07590546100 servicing; recently i had done by local VW specialist headgasket water pump aux water pump head skim compression check fan control module rad flush new vr6 shallow sump modified dipstick oil change and filter chains checked and tensioner replaced all sensors changed (water) hoses all checked for leaks and replaced where worn this all cost around £1500 also had a new heater matrix and rad under previous owner modifications: respray in original colour by Bentley of glasgow (see dubbedupdaz's build thread for paint work) powerflow custom stainless single box system with hidden tip and de-cat (still have original cat) induction kit three stage fan switch on dash (good if sat in traffic or on a run) audi TT 312mm brakes and braided lines all round (callipers all recently recoated) corrado factory roof rack (very rare, takes two minutes to bolt on and off) polybushes all round smoothed rear end all red rear lights (professionally done and baked not film) brand new (went on the car 100 miles ago) fk coil-overs (professionally set up for ride height and tracking) porsche D90's with falken 195/40 tyres all round (all have 5mm of tread) hr adaptors (expensive stud and bolt type) sony head unit and 6x9's in parcel shelf uprated headlight loom and bulbs lupo gti wiper blades and arms rear wiper delete interior standard interior in immaculate condition also have a pair of recaro fishnets that can come with the car and just need bases to fit them. (excellent condition with no bolster wear) bad points front fogs need replacing sunroof tilts but doesnt slide cant think of anything else to be honest! this car has had no expense spared since ive had it and the recent new suspension and tracking has transformed the handling. has also been polished and cleaned every day that its driven (no exaggeration). whenever driven it is also allowed to get up to temperature before taken over 2500rpm, and oil is checked very regularly. this car has had no expense spared since ive had it and the recent new suspension and tracking has transformed the handling. has also been polished and cleaned every day that its driven (no exaggeration) Price Dropped to £2500 (picking up a new car tomorrow!)

do these subframes you have mad up just bolt on the bottom? i have a pair of fishnets and need to either make up a subframe for them or buy some!