adamsimmons

Bumpy bump Sent from my X10i using Tapatalk 2

Hi Jonesy, No worries, ill pm you my details. Cheers. Sent from my X10i using Tapatalk 2

Yeah you can buy them separately I think I managed to buy genuine ones of the net for around £25 last year. I think it was something like vwspares if I can find the name ill send it to you. I would bleed the brakes afterwards replacing or cleaning the sliders. It will be better to replace them as when I tried cleaning mine before I replaced them, the rubbers tore on the seal. Its not a hard job plus means your brakes will work better. While the caliper is off try and work some grease in to the hand brake lever on the back of the caliper too. Sent from my X10i using Tapatalk 2

Forgot to say make sure when you bleed the brakes make sure you start from the furthest from the master cylinder to the closest. The sliders are quite common to going, I've had a few sieze on my vw's Sent from my X10i using Tapatalk 2

It could be the sliders that the calipers sit on, as I had issues with those. Or could be air in the brake lines maybe? Sent from my X10i using Tapatalk 2

Annoying predictive text, but vr6 is right rib strips are a tasty bbq'd snacks. But unfortunetly these ones you are can't eat, they are the rub strips from the side of the car. Lilfuzzer where do you live? Just wondering if ill pass on my travels and I can drop it to you, otherwise postage is fine Sent from my X10i using Tapatalk 2

Sent from my X10i using Tapatalk 2

Here are some pics of the items. Sent from my X10i using Tapatalk 2

Yeah no problems, I shall take some pictures for you tomorrow Sent from my X10i using Tapatalk 2

Bump Sent from my Nexus 7 using Tapatalk 2

Yeah no worries, it will probably be about £10 for postage as its quite heavy. Sent from my X10i using Tapatalk 2

Bumpy Sent from my X10i using Tapatalk 2

I have a few bits and bobs for sale after selling my Corrado 4" Air Mass Meter for Turbo or Super charger conversions (4Pin AMM) SOLD Brand new Q Drive CV joint 657 44 3171 for Corrado VR6 £25 Brand new GKN CV Boot Kit 300426 for Corrado VR6 £10 Corrado VR6 Rib Strips, complete set in excellent condition £30 Corrado VR6 Front ARB Free to a good home Working Coilpack taken from my Golf VR6 was replaced as I thought it was causing a misfire, but was head gasket SOLD Not VW related, Laser Timing Tool for Vauxhall/Opel 1.0/1.2 engines £50 If anyone wants pictures, just drop me a message. I am based in Cardiff if anyone wants to collect, or willing to arrange postage. Cheers, Adam

If you unplug the connectors that connect to the rear screen and put a multimeter across them and see if you get 12v when you turn it on from the switch you can try and eliminate the problem from there. Also check your mirrors too as my drivers mirror was causing the circuit to short before as they are heated too

Ok cool, Does anybody have one for sale at the moment then ??? If not I'll try and make a new cable up for it as the motor is still running well with no noises

Well it looks like after stripping it all down, it has snapped the cable that lowers the window. Does anybody know if you can just replace the cable or is it a whole new assembly. Thanks for your help.

Thanks for the quick response. I'm assuming the reg is behind the door card and riveted on to make things really awkward? When I move the window down, or it drops down on its own accord, the cable goes slightly slack but won't move, so I think it must be jammed or broken. Is there an easy way to fix these or is it one of those lose your knuckles jobs.

There seems to be alot of electric window issues on here at the moment, and mine has just gone now. Hopefully there is someone that can help all of us, and me :) My problem just happened all of a sudden,I have never had any issues with the windows before. Basically the drivers side window will not go up or down. The passenger one works fine off both switches. When I press the button I can hear the motor clicking but can also hear a clicking coming from inside of the panel behind the drivers seat, next to the rear passenger seat. I am getting 12.4v at the motor and 5.5v at the switch when it is activated, I though that this might be the issue, but it is the same on the passenger side. When I press the passenger side button, I don't hear the clicking behind the drivers seat but the window goes down. Hopefully someone will be able to help me on this issue, as it's doing my head in, and also have a window that has dropped down about an inch, and there is only so much heat the heaters can pump out :) Thank you for your help in advance. Adam

I have a roll bar from a C VR if that is any interest to you, its in the for sale section but just need to get rid of it now. So happy to sell it just for postage costs, if that is any help. Cheers, Adam

I'm pretty sure it has the late ones as I have tried another handle which I think was from an earlier model as the lever that controls the mechanism inside the door was too long, and on my now broken one the lever is about 3/4 the length. Does your handle have the cable still attached for the switch built into the lock. If all ok ill be happy to have the handle off you. Do you live near Cardiff, or would it be easier to post it. Cheers Sent from my MB525 using Tapatalk

Does anybody have a drivers side door handle for a 93 VR. Mine has decided to break just before my MOT next week. If any one has one available in the Cardiff area I can pick up today. I tried to put thisin the wanted section but it wouldn't let me post it in there. Any help would be much appreciated. Cheers, Adam Sent from my MB525 using Tapatalk

Im in cardiff, if thats any better for you. I've got a couple here but dont mind lending it as long as I get it back :) Sent from my MB525 using Tapatalk

Thank you very much, Ill order some first thing monday morning. You have saved my bacon. Thanks again Adam Sent from my MB525 using Tapatalk

Hi, Does anybody have some rear calliper hangers for a 93 vr. Mine have decided to seize solid and have broken one of the sliders already. I need them as soon as possible, so if anyone has some spare. I have cash waiting and willing to pick up if in the cardiff area. Please give me a shout if anyone can help me out as I need to get an mot this week. Cheers for the help in advance, Adam Sent from my MB525 using Tapatalk

Not alot to say about it besides will probably look a bit better painted, otherwise its an antiroll bar. Nothing wrong with it, just been replaced for a little eibach number. Don't know how much its worth but would prefer collection as its a bit big. £20