C-UNIT

I have some 16v parts for sale corrado rear parcel shelf custom made replica of the orginal, solid fits as the original just no hold ups due to weight, comes with pair of jbl gto 6x9 speakers fitted. covered in black material pics can be sent if needed. £100 https://ibb.co/pw3HYrn https://ibb.co/b3YgQS9 https://ibb.co/QN6nsyV https://ibb.co/d0HP7jX 16v original fuel assembly swirlpot, holder, kjet pump and bracket it attaches to under car with fuel lines attached but not the full lines included. beacket has rust but can be cleaned coated. working condition pumps working good too. £150 https://ibb.co/0cpSrhh https://ibb.co/zG9vYGQ https://ibb.co/vD4Qpcd 16v original fuel tank with lift pump still in tank comeplete in condition. £50 vr6 fuel tank the bigger 70l tank good condition clean no pump included. £50 https://ibb.co/pXSbcFS https://ibb.co/yWHSHmw location west midlands Thanks

Hi 20vt goes well for sure, ill post some pics soon, the walbro will be 6bar+ so should be plenty to feed the fuel. i have 4bar fpr so either way it will be restricted to 4bar i have bosch 550cc injectors and hybrid ko4 with jabbasport manifold hoping once this fueling is sorted and i can get time on rollers i hope to see 320bhp+ not looking to push anymore altho they claim 350hp on hybrid. see what my mapper says. Engines fully rebuilt forged rods etc so should ok. Thanks for all your help sanj

Hi Si, Firstly thank you for your detailed reply just the info i needed your a star! Sorry i should have said my corrado has 20vt in bay so due to my current fuel pump kr under car with filter is soo old the screws on the pump have almost perished and matter of time before major leak. the brack which holds it all as we know rusts so much its not in good state this is why i am planning vr6 corrado tank into mine may be walbro intank pump to replace original fuel pump thats in the vr6 swirl pot and remove undercar set up with just fiel filter. i have been told others have done this on corrados or mk2s and walbro being uprated will be sufficient to feed my 4bar fpr on 1.8t. if all works i post update either way Cheers Si 😀

Hi, its been some time since i have done any upgrades but now my 16v h plate corrado fuel pump is old i need to upgrade. My question if any one can help me, can i upgrade fuel tank from current 16v 1990 to corrado vr6 tank or is my only option mk3 golf vr6 tank where i know the walbro fuel pump intank fits. i have been told vr6 corrado fuel tanks will fit and same as mk3 dimensions ? my current tank 16v has lift pump intank and under car kr kjet pump in swirl pot and fuel filter.

For sale set of Brembo calipers and 305mm discs with pads adapters and bolts. Good condition originally from a seat cupra hopefully pics will work! Bargain at £400

Provisionally SOLD now

I have double checked and they are 61/2 J X 15 ET33 15 x 6.5 sorry for the error Thanks

I will double check them and update

Hi, Yes still for sale

Hi sorry 15 x 7 Tyres 15" Walsall west midlands Thanks

sorry for late reply 4x100

For sale 4 x BBS Alloys 3 tyres are toyo proxes and 1 unknown brand 1 alloy has curb damage few scuffs on some alloys as can be seen in pictures for sale due to bigger break set up they wont fit over Brembos now been used for motorway journeys and local driving now stored in my garage need space asap £150 collection WS1 Thank You [ATTACH=CONFIG]77622[/ATTACH][ATTACH=CONFIG]77623[/ATTACH][ATTACH=CONFIG]77624[/ATTACH][ATTACH=CONFIG]77625[/ATTACH][ATTACH=CONFIG]77626[/ATTACH][ATTACH=CONFIG]77627[/ATTACH][ATTACH=CONFIG]77628[/ATTACH][ATTACH=CONFIG]77629[/ATTACH][ATTACH=CONFIG]77630[/ATTACH]

Hi PM'D You

Hi, yes was fitted for a while with no issue or cutting required. hope the picture works but as you can see it fits in front of the radiator and i bolted it from the top of the slam panel the rad you can see is a large sprinter one i still had room for the 90 angle samcos to fit. you would have room to fit under the slam as well although the down support bracket would need a little hacking. [ATTACH=CONFIG]74179[/ATTACH]

Hi All, I have a Front mount intercooler for sale which was custom made By Radtec, Radtec are very well known in the intercooler industry and they made this unit personally for corrado spec, it fits in front of the slam panel or under where you feel you want it positioned. The size of the core length is 50cm Long Height if 18cm Thickness is 7 cm Can flow up to 350bhp Some signs of use and marks however fully working order and no leaks! Paid £350 few years ago as it was a custom item I will add pictures asap which will confirm its by radtec showing the radtec seal stamp. Selling as i have gone big turbo and need bigger cooler. £100 can deliver or pick up free / Paypal or cash on collection. Thanks [ATTACH=CONFIG]74164[/ATTACH][ATTACH=CONFIG]74165[/ATTACH][ATTACH=CONFIG]74166[/ATTACH][ATTACH=CONFIG]74167[/ATTACH]

hi it was the bar mainly i was after but no probs i et back to you about the bumper skin cover thanks

Hi its probably sold and i'm too late lol your front bumper still for sale if so is it complete with rebar is the rebar ok rust wise? thanks

Doeas anyone know if vw still make front bumper rebar support or doea it come complete with bumper, mines got rusty and dont know if i should just grind as much off as i can and just paint it, is it the case most front bumper rebars with age will have some signs of rust?? not sure help appreciated guys. Thanks

cheers i think i have fixed it mite get as spare though get back to ya Thanks

So true sometimes you choose the car for what it is and color sometimes comes 2nd, situation at the time availability of colors plus rados are rare..i wonder anyone know how many raddos in the uk left at a guess? Red can look good though! [ATTACH=CONFIG]69965[/ATTACH]

Hi looking for rear boot lock on the boot lid, if there is no barrel thats fine Thanks

Wow have to agree it looks amazing! Oak green rado is the one altho Blackberry metalic will look just as good good choice.

The mk2 looks mint nice finish! I have now done the deal with a sprayer who has also voted for original color hope to post pics soon.

Thanks guys some good advice my feeling is to keep original color i dont have intension to sell but its so true unfinished bits like engine bay which i dont have plan to do may be in future but its not really a show car so aiming for the best finish i can get..if i was to chane color then its going to be done properly it will probably cost more. so i think if its done right helious can look amazing it is rare and recognised as a vw corrado color. i hope to post pics once its done..for now i continue to strip as much off as possible.