16v_alan

Hey Wilko, did you manage to get to the bottom of this and find out what was blowing the fuse? I’ve got a similar issue, as every time I disconnect and reconnect the battery that same 20a fuse blows.. any help to try to diagnose the problem would be much appreciated.

Yeah, those are the symptoms Swifkid. And I had my BPPS repaired by Stealth too. Not too difficult to remove if you have a kebab skewer handy to unseat the circlip. As well as that, diagnostics also suggested that front OS sensor and Rear NS sensor and Ring were faulty on mine. After replacing all parts with new and clearing codes, ABS began triggering consistently upon braking at low speeds. On the off chance that I might find a quick fix, I cleaned up the old front sensor with WD40 and switched out the new one. One month later all is well, ABS light is behaving and I pray to the corrado gods every night. To summarise, considering this and that there were no signs of mechanical failure to the Rear Ring, I recommend cleaning those pesky sensors before replacing – the fronts are accessible without removing, the rears aren’t accessible without popping off the brake calliper etc. Hope that helps someone.

To answer your question David, no the ABS won't need resetting after disconnecting and reconnecting a sensor. Should just be able to plug back in - check procedure will detect it's connected on start-up again. I suggest clean the contacts of the one you unplugged. If you were driving around for any length of time with them disconnected there's a chance you could have collected dirt in there. I'm doing some ABS whispering myself, similar symptoms. will update on here when I get to the bottom of it...

Hello MZpog, I'm interested in the KR Head. What's your knowledge on the flow/porting work carried out, i.e. by whom, and to what extent? and has it been ran since it was skimmed? Also, any ideas on price you'd like? Thanks

definitely interested depending on how cost vs volumes works out to be. refresh my memory...are the fogs on the same on all the 'rados through the years, or was there a revision with the facelift ~1992? if so would the proposed design fit on old and new? top work rob. cheers :)

i'll take the sunroof seal if it's still available? cheers.

alright gracie lou yeah, i'm in portsmouth, alexandra park area. classic green m-reg valver. and you? be sure to give me a cheeky wave if we pass :-)

i have bumper irons/brackets left over from my re-spray last year should you need them. just sat in the garage gathering dust, so let me know and i'll send them out. cheers. ---------- Post added at 3:25 PM ---------- Previous post was at 2:29 PM ---------- i have bumper irons/brackets left over from my re-spray last year should you need them. just sat in the garage gathering dust, so let me know and i'll send them out. cheers.

ditto this.. i'm on the look out for a new or nearly new one, if anybody has one. cheers.

saw this yellow one in fratton saturday morning. on an h plate. rather nice wheels.. half hour later spotted a tornado red rado turn off albert rd southsea into exmouth rd. not sure what model though.. good weather brings 'em all out it seems

sounds good dave b keep me posted cheers

ok gents, what would the cost of sending it be? ta

alright i'm looking for an old cat for my 2l 16v doesn't have to be perfect inside i.e rattly ceramic etc. cos i'm gonna gut it n weld it to make a budget cat bypass pipe. cheers

if ur still breaking ur rado mate i'm interested in the kr cams as well as a few other bits cheers ---------- Post added at 9:03 PM ---------- Previous post was at 9:03 PM ---------- if ur still breaking ur rado mate i'm interested in the kr cams as well as a few other bits cheers

just spent £60 at the dealers on the drivers side a good 2nd hand one will be worth £15 to the right person..