eddy.h

have a look at www.vwspares.co.uk 56.82 new no exchange ---------- Post added at 9:09 PM ---------- Previous post was at 9:00 PM ---------- i wood recommend fitting n.s & o.s calipers to do the job right

http://www.etkashop.com/vwcp/Scirocco-Corrado/Corrado/Heizung-und-Lueftung-Klima/Regulierung.html

hi mate i no you have modified the pulley to add a toothed crank wheel for cps i men the harmonic balancer/pulley the standard g60 one is in 2 pices http://www.bahnbrenner.com/vw_audi/products/2525/Crank_Pulley_MkIII_ABA_8v_OEM_NEW

hi mate good work been thinking of going down this route is the ecu omex 600 series & is that the aba crank pulley :thumb right:

an-one help someone must have a passenger seat base foam & fabric they dot need please please please help

if you have no look in selling this interior i'm in need of a passenger seat base including the foam & fabric

Hi all right head seat bolster needed or passenger seat base thanks eddy

now on ebay

planing on going bbm lysholm so iam selling my charger rebuild parts Apex strip beige Circlip kit Bearing for inlet said RS special bearings for uper shaft SKF Main shaft keyways Wide belt 12mm Oil seals bar-tek loctite 518 all parts are new £230. posted 68mm pully £15.+ post[ATTACH=CONFIG]62137[/ATTACH]

mine are white faces & red needles [ATTACH=CONFIG]60481[/ATTACH][ATTACH=CONFIG]60485[/ATTACH]

the gauge faces arrived today ive powered them up & they look sweet i got the rest pins out not sure wot glue to yous sorry i did not get back to you about the heater controls i do need this doing wood need to be illuminated in red & mien is no air con thanks eddy

thanks for the update james looking good needle kit is also in the post btw can you give the same service to the early heater controls

sounds good i am about 10 mins away

my windscreen is original vw & the white plastic clips where not broke i broke them trying to get them of after removing the factory trim pieces

the original 3 piece windscreen trim on my car had all the metal & plastic clips intact & black adhesive/sealant i have removed 3 original windscreen trims on 3 different corrados all used black adhesive/sealant so i presume its original the spoonfedtuning trim does not use the plastic clips so i used sum adhesive to sick it down the fit of windscreen trim is bang on all the holes are where they should be the 2 small problems with the scuttle tray are small i happy with the 2 trim pieces & will continue to ues spoonfedtuning the trim pieces can be viewed at ultimate dubs

that the problem with custom parts

[ATTACH=CONFIG]52677[/ATTACH][ATTACH=CONFIG]52681[/ATTACH] they is a how to at spoonfedtuning.com its in support ( corrado rain tray diy ) i used 4 of the metal clips for windscreen trim & 4 metal clips with a bit cut of to put the to trims together

[ATTACH=CONFIG]52665[/ATTACH][ATTACH=CONFIG]52669[/ATTACH][ATTACH=CONFIG]52673[/ATTACH] sorry forgot to post been busy got the parts fitted & look f£cking awesome i needed to sick the windscreen trim down there was a gap between the trim & windscreen also had to cut the bracket for the wiper-motor & the washer bracket is also a problem I've not got the washer pip counted they have the same probiem with the LHD scuttle tray

---------- Post added at 09:59 PM ---------- Previous post was at 09:56 PM ---------- [/color] Liking them wheels chief very nice thanks mate i got them in december so its abuot time i got them fitted ---------- Post added at 04:57 PM ---------- Previous post was at 04:56 PM ---------- ---------- Post added at 09:59 PM ---------- Previous post was at 09:56 PM ---------- [/color] Liking them wheels chief very nice thanks mate i got them in december so its abuot time i got them fitted

been to parcelforce they dot have it awaiting customs clearance i will keep checking parcelforce are open 8am to 7pm soon as i get it i will fit it

got soum pirelli p zero nero 195 45 16 v fitted to my concept p wheels so got them fitted[ATTACH=CONFIG]51965[/ATTACH][ATTACH=CONFIG]51969[/ATTACH]

x2