dan

I'm in N. Ireland so Royal Mail don't charge any extra

Hi mate, do you still have the.. Brand new wiper arm link part number 536955325 x2 available £16.00? I'll take one of these if you have

Brilliant! Thanks all for the input. Great to see all the different options! I think I'll probably go with using the now redundant wiper motor wire connected to the brakelight wire and take the ground from the tailgate.

So do you have the third only coming on controlled by the rear wiper switch?

Ah yes, that's what I was thinking of doing. I have the back wiper removed as well. Where did you connect the wiper wire into the Black/Red brake light supply?

Thanks guys, I can see the Black/Red brake light wires behind the corner lught clusters. But I'd rather take a supply from the actual tailgate. All that I can see in the tailgate is wires for the foglight on the drivers side and the two reverse lights. Let me know what ye have done over the weekend.. appreciated!

Hi guys, As the title suggests I'm thinking about fitting a high level brake light to my car. I think that with more and more new cars getting bigger and bigger these days, I don't feel that safe anymore in my little low Corrado surrounded by big white jeeps doing the school run.;-) Actually had a couple of close calls recently. I have several options on the led side as we use a lot of different types at work. I'm thinking about drilling the upper window trim and pushing through about 15 round LEDs through. I have looked into getting the brake light supply up to the inner top of the tailgate window trim. I have looked at schematic drawings for the Corrado and see that shows that there is a supply for the high level brake light in the right-hand side cluster. On checking this i can see the supply Black/Red wires coming out from the rhs brake light but can't see where it goes. The schematics are not that detailed and don't state exactly where to find the supply. Ideally it should be in the actual tailgate so as to make it easier to run up to where the light is to go. But I cannot see anything in the actual tailgate. Am I missing something? can anyone tell me? I can't find anything on the net that explains about the actual wiring up. The only thing I can see is something wrote by Kev (who used to be the main man on here). He said... You can take a brake electrical feed from the nearside rear light cluster as that's where you would plug in a tow bar loom :wink: If I get the help on this, I'll go ahead and do the job and also do a 'how to' for anyone else thinking about doing this. Cheers

I bought a second hand Milltek off of eBay Thanks!

Hi guys! My exhaust system is blowing out through the exhaust and the car sounds a bit zippy. I had a look underneath and it seems to be the piece between the cat and back box. I was wondering if anyone has a good second hand one for sale. I would also be interested in a Milltek. Either the pipe on its own or cat back would interest me. I can pay via PayPal and arrange for it to be picked up. Thanks in advance! 👍

Sad to hear of this! RIP Bally

I just ordered some of these... They're called WINDSCREEN WIPER LINKAGE MOTOR REPAIR CLIP KIT on eBay. I haven't got them yet but many people say they work to keep the mechanism together.

Happy Christmas guys!

Hi mate, I'll take 2 Door end bungs £4.00 pair 1 Rear brake equalizer spring £1.00 1 Tailgate loom rubber @£2.00 10 Body OE aperture seals 40mm* £10 for the lot 1 RH Rainwater scuttle cover no clips £5.00 1 Fan blower motor working £5.00 1 Rear brake equalizer bolt socket head domed £1.00 Let me know what you need to post! Would also like 2nd dibbs on the Powerflow exhaust system, I was actually looking about one of these at the weekend. Thanks P.S. whats your new project?

Cool, keep us posted on your progress. You got any pics yet?

Hey man, welcome to the club! Nice to see that someone at VW still has love for the Corrado!