chaos3oe

I have one known good, £40 plus post?

This is the connector socket on mine, 845C

I have a spoiler module, part number is 535 919 845 C though? £15 plus post if this is what you are after, not sure as your part number is different? If you are after the one that raises at the lower speed, theres one on ebay here http://www.ebay.co.uk/itm/VW-CORRADO-1-8-2-0-16v-G60-Vr6-ELECTRIC-SPOILER-CONTROL-MODULE-535919845-A-/111033753015?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item19da209db7

You can 'just' get it if you undo the front and rear engine mounts and jack the engine up until the crank pulley touches the chassis rail, use a spreader block on the sump though. Takes a bit of wiggling but it will come out.

Coolant pump went on mine and it sounded like it was going to shake itself to pieces, should be no play in the pulley sounds like your problem.

No problem shipping to Ireland, although have to check on the price. I'll do that and take some pics for you tomorrow. cheers

Got one all working from a 93 VR, not blue though? £20 posted if you want it. cheers

I have a set of 280mm calipers and carriers, all working fine, with fairly new hoses still attached. You would just need a set of G60 discs and pads to complete. Yours for £60 including post. thanks

Thanks to Summz, clumpy1 and Portent. Prompt payment and good communication. cheers

I'm suprised it didn't snap! The bolt will be rusted into the centre collar of the bush. If it's turning and not coming out any more, it's free of the threads, so whatever caveman method gets it out shouldn't do any damage in theory.

I have an original one known working from my car i've owned for the last 7 years, breaking due to rust, engine ran sweet. I want £25 posted.

I have a good original cat you can have for £30 plus whatever it costs to post?

feel free to make me an offer?

I have a black parcel shelf, no holes in good nick. It has home made lifting straps that go to the tailgate which do the job but not original. £35 posted

The exhaust is in good solid condition, and fits well no knocks or rattles, just a little bit of surface tarnish. It has been on the car since I bought it so I don't know where it was made, but it's never needed any attention. I have only removed the rear section and over axle pipe so far and it's p*****g down today. I have a couple of photos, one just as it was removed not cleaned up, one on the car of the tailpipe. As in the list, this is not a performance system, is nice and quiet. Idle sounds purposeful but no louder than standard, virtually silent on the motorway, but at full chat is just enough get the full VR wail effect.

Some pictures of body panels http://s1357.beta.photobucket.com/user/mike_wills1/library/Bodywork%20and%20fittings?page=1

The Bentleys are American, but it's always done the job, it's the one to get. It's 2.5kg, he'll do it for £55 posted 1st class. If you want it i'll pm you payment details, either bank transfer or paypal gift. cheers

My Dad has his Bentley manual for sale, couple of oily finger prints i've put on it (oops) but well looked after and otherwise in very good nick . He wants £50 plus post. I'll get him to weigh it and see how much it will cost to post.

VW do not sell this on it's own, only the complete elbow. Ford do (or did a few years ago when I got my last one), for a Galaxy VR6. Think the Ford part number is -7364573 :valve assembly for a galaxy v6 circa 1996-onwards

Yep, been out to check definitely ball end. cheers

Yes i can send a picture tomorrow but to be honest its come off an 18 year old car with original paint. its good for the age but there is also a patch of lacquer that has dulled.

Its not mint little rust bubble under the bottom of seal

Some interior parts added to the list

Unfortunately the front end panels are not really good enough to be fitted without a respray and a couple of small repairs. The bonnet has no rust but needs a respray and a small dent sorting. The drivers wing has a small amount of rust on the rear of the lip, and the passenger wing has a rust bubble by the side repeater. If you want pictures I can take you some tomorrow. ---------- Post added at 8:25 PM ---------- Previous post was at 8:24 PM ---------- Sending to you via PM. The handbrake handle has gone.

£5 and i'll send it first class in the morning so you'll hopefully get it Sat?