jimmymcq

Hi sorry. vr6. I beleive it to be right. the shocks look the same as the old ones

Help people I have bought a set of konis with eibach springs dropping the car by 30mm ish. rears have gone on no dramas at all. The fronts tho are a nightmare. the spring plate off the old shocker is to small for the eibachs and the one that came with it doesnt fit with the top rubber so when i drop the car the shocker just pushes through the top mount to the point i cant fully shut the bonnet. I'm sure what i'm writing wont make to much sense but if you can offer some help i'd be grateful. i imagine i'm doing something stupid. As best i see it though at the top you slide on the spring put on the top plate and bearing and tighten down till the nut tightens up. put the ruber bush over the top of this. locate the shocker and mount the bottom two bolts then put the plate over the top mount and tighten up the nyloc nut at the top. Should be no more to it?????? Do i need any different parts to install these? i got the shocks and the top spring plates and that is it. thanks for any help james

Hi have you still got the number plate trim that goes around the boot lock? is it intact and how much to north yorkshire? I see you have sold the front badge but do you still have the front grill itself again what cond and how much if you do. sorry if mentioned but this threat ha got big fast. cheers james