Can you fit Seat Cupra R Brembos and 330mm discs to a VR6???

[biggerbigben 0]

Need to know if anyone has done it before....

 

Anyone know the rough cost aswell, cause my mate wants to upgrade..

[Henny 0]

have a word with Bill over at Badger 5... He supplies full Brembo kits and will know the exact ins and outs as to fitting them to a VR6... 8)

[biggerbigben 0]

good call....cheers

[Mike Edwards 0]

Think you need spacers of the same size as those to fit 312mm Mk4 Golf/Audi TT brakes.

[chubbybrown 0]

Did you see the throttle bodies over at badger 5 :D

[Kevin Bacon 5]

Having worked on my mate's Cupra R recently (changing his pads for him) I took the oppurtunity to inspect the parts at the same time, with a view of fitting them to the C. With the right carriers, they will go on easily was the conclusion. And that's the tricky part, finding some :| But as Henny said, Bill Brockbank will know the answer. Spacers are a must. Those Brembos are big boys!

 

I also stuck one of his 18s on my car and it looked ridiculous, LOL!

[LicklePaulie 0]

This is ALMOST on topic... I put Brembo 323s on my VR (Mk IV Golf kit). Discs, straight replacement; Calipers straight replacement. The calipers needed shimming in very slightly (2mm washers between bracket and carrier) but no spacers required. Did need spacers on the rear but that was due to my 8Jx17s rubbing on my also-new H&R coilovers.