Front hub bearings

[Yandards 0]

I am in the process of reconning some G60 hubs as parts of my current project but after splitting the hub from the lower suspension arm I am left with some of the bearing still attached to the hub.

 

Any ideas how to split these two bits apart?

 

Cheers,

Yan

[theRuler 0]

which bearing are you referring to?

do you mean the wheel bearing?

 

or are you talking about the ball joint?

 

either way, its hammer time.

[Yandards 0]

The wheel bearing, will stick some pics up tomorrow when I get chance.

 

Hammer time is good but I need to get something in first to lever before I hammer.

[h100vw 0]

If it were me, I'd angle grind a notch in it, until I could get a chisel in to spilt it. Or get your self a blow lamp and get it nice and hot. Probably get something small behind it to lever it off then.

 

Gavin

[VR6 0]

Servicing forum

[Yandards 0]

Sorry :oops:

[theRuler 0]

if it is the outer track of the bearing stuck in the hub, you should be able to hit it back through. there is a lip on it, get a "suitable drift" and smack the shiit out of it.

 

think of "handy andy's" hit record when you are doing so . . . .