in-pro rear ligths

[fast x 0]

ok guys ive seen a couple of rrados with this ligths on, but as u all kwon these dont fit quiet rigth im taking about the iner ones they are abit higer than the outside ones anyone with pics or solutions? of how to get them to fit level???

 

cheers philip.

[Phil K 0]

mine fit fine... have you tried losening the bolts and moving the lights slightly to improve the fit?

[Riley 0]

i found the gap between the inner and outer to be bigger than the oe lights were...

 

little tweaking got them looking better,and there steamed up inside already :!:

 

tell ya most after market bits are shite!

 

but they do still look better :?

[Tempest 0]

and there steamed up inside already

 

I've never had any misting or steaming up problems with my In.Pros. What I did do (don't know whether it made any difference) is smear a little grease along the rubber seals before applying the lights to my Rado :-)

 

Tempest

[bcstudent 0]

My rear lights are even cheaper made than InPro but I've had no problems whatsoever. Certainly no steaming up.

[Henny 0]

I've never had any misting or steaming up problems with my In.Pros. What I did do (don't know whether it made any difference) is smear a little grease along the rubber seals before applying the lights to my Rado :-)

 

Tempest

 

You and me both matey! I also smeared a little silicone grease along the seals before fitting 'em too... 8)

I've got a set of In-pro and a set of FK rear lights on my G60s and neither of them have steamed up.

[Riley 0]

strange,everytime ive bought some ive always used a little clear silicone.

 

and yet they always steam up!

 

headlights and back lights have been the same on the cab and the mk1 :?

 

neil.