potatonet 0 Posted April 3, 2005 ok being that no one looks at the other sections for posting very often, IE steering.... I thought I would pose the question here. I have a 90 G60 US SPEC and am wondering if a 93 canadian spec VR6 corrado steering rack will work in my car. easy quesiton. thanks guys Quote Share this post Link to post Share on other sites
VR6 0 Posted April 3, 2005 Doesn't work like that I'm afraid. Moving to Drivetrain. I know where you're coming from, but you will find that most people use the 'view posts since last visit' feature or most recent posts via the portal. Sorry about that, but we can't make exceptions, so I hope you can appreciate where we're coming from. Quote Share this post Link to post Share on other sites
potatonet 0 Posted April 3, 2005 ya i do but does the setup work for my car? Quote Share this post Link to post Share on other sites
vr6storm 0 Posted April 3, 2005 ya i do but does the setup work for my car? don't think it does.............different part no's between G60 and VR6 ones......not much help to ya but i know the Golf VR6 rack is interchangeable with the VR6 Corrado's one Quote Share this post Link to post Share on other sites
dr_mat 0 Posted April 3, 2005 Corrado VR6 got the Golf 3 GTi/VR front "plus" steering/suspension. The earlier Corrados used the Golf 2 setup... Quote Share this post Link to post Share on other sites
potatonet 0 Posted April 4, 2005 great so a golf 2 rack would work, like one from a 90 Quote Share this post Link to post Share on other sites
davidwort 0 Posted April 4, 2005 great so a golf 2 rack would work, like one from a 90 don't think so, there are loads of different part numbers for racks and I think most of the golfs will have different ratio's to the Corrado, don't think any of the passats have the same ones either, you need to make sure you have the same suffix letter(s) on the part number as yours. David. Quote Share this post Link to post Share on other sites
Mike Edwards 0 Posted April 4, 2005 A LHD rack for Chassis No. up to 50-N-011 487 uses the same rack as the 16v Golf/Jetta/Vento from 1986 to 1992. From Chassis No. 50-N-011 488 on it's Corrado-specific. Quote Share this post Link to post Share on other sites
potatonet 0 Posted April 4, 2005 I have an 89 so I think I am fine Quote Share this post Link to post Share on other sites
Rossco 0 Posted April 5, 2005 Me too and ive just ordered a mk2 16v one, its the same, just check etka and put in the part numbers Quote Share this post Link to post Share on other sites
VEEDUBBED 0 Posted April 10, 2005 Watch also the make of rack, TRW or ZF?, there may be differences concerning ratios between the two. Also earlier types had 36 Splines whilst later one's had 22 on the output shaft. Quote Share this post Link to post Share on other sites
