chrishill 0 Posted April 11, 2005 Does anyone have any images, real or photshopped, of a C wearing azev a's? i know there are fitment issues with these but I'm prepared for that. Stilauto no long make the 'sigma' which looks simular so they're out of the question, but I'd like to see a photo of them on a corrado before I make a final choice. I've seen one before, but cant find it now! typical!! ta for the help in advance... Quote Share this post Link to post Share on other sites
W3RKD 0 Posted April 11, 2005 have a look on lukes "g60dubs" gallery as he has them fitted Quote Share this post Link to post Share on other sites
chrishill 0 Posted April 11, 2005 so he did! cheers darren...heads spinning with ideas now :lol: Quote Share this post Link to post Share on other sites
Phil K 0 Posted April 11, 2005 Here's an extra pic for you... BTW I have a feeling they don't fit on a VR too well (clearence issues) maybe someone can confirm that? Quote Share this post Link to post Share on other sites
chrishill 0 Posted April 11, 2005 spot on phil, thats the pic i've seen before (i think) yeah there are caliper clearence issues with the VR, but I think it can be done with some careful grinding...maybe! they're either et35 or 40, so I'm thinking get the 35's for maximum chance of clearing the calipers and as I say, some careful grinding. Its either these, cup 3 replicas or RS4 replicas. wasnt sure on what the azev's looked like on a C, cup 3's i'm still kind of undecided on if i like them or not half the time i do, the other half i dont! and I fancy some RS4's after seeing them on that gray C that looks so good. I'm WAY to much of a tart over wheels! Quote Share this post Link to post Share on other sites
Phil K 0 Posted April 11, 2005 finding the right wheels for the C is always going to be a tough choice as many wheels that I consider to be nice just don't quite look right on the C - Azev's I'm not 100% on TBH, but don't get me wrong I have loved these wheels for ages and always wanted a set for my Golf... The C above does look good on them but I have seen other colours not working so well! Most Posche rims work well but D90's seem to have the same issues as the Azev's (some good / some bad) If I were looking for the VR then I'd prob be going for the RH rims that Kev, OSV and VR6 have on theirs... Good luck what ever route you decide to go down 8) P.S. having said all that I'm about to stick a set of TSW Evo R's on mine and I've never really been too keen on them but they didn't cost me much so it's worth a try :roll: :lol: Quote Share this post Link to post Share on other sites
chrishill 0 Posted April 11, 2005 yup RH's were on the cards for a while but I've had to have a rethink, cant find many wheels that are a simular style to those and arent going to break the bank! I do like design 90's but they're 16" and I wanted to go for 17's really. I'd like to find something thats a bit unusual (hence azev's on a VR), carrys a sense of class, has a bit of a dish and isnt too expensive! I think i might be looking for some time... Quote Share this post Link to post Share on other sites
OSV 0 Posted April 11, 2005 Hope this helps, 8x17 ET30 Quote Share this post Link to post Share on other sites
Chris VR6nos 0 Posted April 11, 2005 For the look i'd have to say my pref is for a deeper dish to get the effect else the cup3 looks better on a lowered car. I just have cheap ass Fox6 things but were free on the car. Chris Quote Share this post Link to post Share on other sites
JimSTORM 0 Posted April 11, 2005 i would help you out with a couple of pics of mine on azav a's, just cant seem to ever get them uploaded.. but they look very nice on the c!!! Quote Share this post Link to post Share on other sites
chrishill 0 Posted April 11, 2005 could you email them to me mate? Quote Share this post Link to post Share on other sites
Neil L. 0 Posted April 11, 2005 Heres a selection of A's on C's...... Quote Share this post Link to post Share on other sites
Neil L. 0 Posted April 11, 2005 Must admit they were my first choice after getting my VR, however after looking at so many rims, I do now fancy the Keskin range (KT-1, KT-4)! Quote Share this post Link to post Share on other sites
Phil K 0 Posted April 11, 2005 They look best with the flat centers and slight polished dish (like on the black one) IMO Quote Share this post Link to post Share on other sites
chrishill 0 Posted April 11, 2005 they do look nice, but the more i see them the less i like them...god i'm fickle! liking these though... what do you lot think? Quote Share this post Link to post Share on other sites
Phil K 0 Posted April 11, 2005 ??? that's just the Piston Heads logo ??? Quote Share this post Link to post Share on other sites
chrishill 0 Posted April 11, 2005 is it?? I've got a picture of a golf here! hold up.... http://www.pistonheads.com/classifiedpics/29615-1.jpg Quote Share this post Link to post Share on other sites
stevemac 0 Posted April 11, 2005 that's the same "piston heads" logo............ Quote Share this post Link to post Share on other sites
chrishill 0 Posted April 11, 2005 [schild=2 fontcolor=000000 shadowcolor=C0C0C0 shieldshadow=1]*!?$%! off-site link protection![/schild] Quote Share this post Link to post Share on other sites
Phil K 0 Posted April 11, 2005 prefered that Azevs tbh... 8) Quote Share this post Link to post Share on other sites
Chris VR6nos 0 Posted April 12, 2005 Hmmnnnnn.....not my favourites either sorry, look a cheap second option. God i'm negative, must be my diet at the moment, think positive, think positive Chris Quote Share this post Link to post Share on other sites
