Jump to content
Sign in to follow this  
Rob Heath

Fan not workin upto speed

Recommended Posts

On setting 1, 2 and 3 the fan works but not very powerful

 

Setting 4 is slightly better, but still not pushin alot of air out

 

The air gets pretty warm and the different exit positions all work (eg windscreen, footwell etc)

 

Any ideas, Ive put up with it over summer, but is annoyin now havin to wait ages for the fan to de-mist the windscreen

Share this post


Link to post
Share on other sites

Something similar to me. Fan works fine on 1 & 4 but 2 & 3 are the same as 1! Again, all the exit positions are fine and there is plenty of heat. I don't really mind it much cos 4 is still powerful if I need it.

Share this post


Link to post
Share on other sites
On setting 1, 2 and 3 the fan works but not very powerful

 

Take th efan out from the passenger side under dash. It may be the bottom bearing needs looking at. A bit of light bearing grease will help. Surprised the thermal fuse is holding out.

 

Also while in their, check what sort of "12 volts" supply is across the fans contacts in the connector, brown wire ( earth ) to ??, when the fan switch is switched on.

 

.

Share this post


Link to post
Share on other sites

hey guys i have a similar problem, except that my vents are piss poor, the footwell and screen work fine on all settings 1-4 but the vents seem to push sod all air out, any ideas wat this could be???

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

×
×
  • Create New...