glen 0 Posted February 4, 2006 Ive brought some audioscape pods and are on the way but i need to cut speaker holes and window switch, never delt with fibre glass before what the best way to go about it? Quote Share this post Link to post Share on other sites
Trig 0 Posted February 4, 2006 Don't they come pre-cut? Quote Share this post Link to post Share on other sites
Supercharged 2 Posted February 4, 2006 No - Audioscape will cut them tho but will need to know what size speakers... give them a call when you have the speaker size, the use a diamond wheel to cut... Quote Share this post Link to post Share on other sites
Trig 0 Posted February 4, 2006 So they do, but you have to tell them... :) Quote Share this post Link to post Share on other sites
Andy Brookes 0 Posted February 4, 2006 lots of masking tape and a drill and jigsaw. Sketch the hole required using a compass. Mask the leather effect material with a few layers of masking take. Drill and 10mm or so hole near the edge of the sketch, then jigsaw carefully the hole. Just go careful and use plenty of tape. Quote Share this post Link to post Share on other sites
GIXXERUK 0 Posted February 4, 2006 ring james at audioscape , he will give you some proper advice Quote Share this post Link to post Share on other sites
Andy Brookes 0 Posted February 4, 2006 ring james at audioscape , he will give you some proper advice Instructions I gave are from Audioscape instruction sheet that comes with the uncut pods...... :scratch: Quote Share this post Link to post Share on other sites
GIXXERUK 0 Posted February 4, 2006 Andy Brookes, horses mouth is always better though Quote Share this post Link to post Share on other sites
Andy Brookes 0 Posted February 4, 2006 yeah yeah Quote Share this post Link to post Share on other sites
Kevin Bacon 5 Posted February 4, 2006 Use a compass and scribe the speaker cut out into the fibreglass. then gradually cut it out with a scalpel. It's the next best method after a proper diamond cutter. Quote Share this post Link to post Share on other sites
glen 0 Posted February 8, 2006 decided to give to my local friendly ICE fitter man, i only balls it up! Quote Share this post Link to post Share on other sites
