Fez 0 Posted March 20, 2006 Does anyone know if there is anywhere in South Wales or Bristol area that refurb and port and bore out to stage 4. If so can you let me know the website add's and if they come recommended. Cheers, Fez Ps. long time no see chaps :D Quote Share this post Link to post Share on other sites
W3RKD 0 Posted March 20, 2006 http://www.jabbasport.com JMR http://www.pitstopdevelopments.co.uk http://www.gwerks.co.uk There are proberly a few more but these seem the most pouplar of the bunch. Quote Share this post Link to post Share on other sites
Fez 0 Posted March 20, 2006 are these based in the specified area g-dude? Quote Share this post Link to post Share on other sites
W3RKD 0 Posted March 20, 2006 you could allways drop your unit into Dubusiness in cardiff as they are an authorised outlet for g-werks and can sort it for you. Quote Share this post Link to post Share on other sites
Fez 0 Posted March 20, 2006 G, dont suppose u no there address? If so can u post it or pm it to me. Also, if I took it in could they tell me whats wrong with it? Cheers, Fez Quote Share this post Link to post Share on other sites
Walesy 0 Posted March 21, 2006 I moved your thread , to the suppliers section :lol: Dubusiness have also moved, to Llantrissant , i don't know the address tho. Quote Share this post Link to post Share on other sites
bristolbaron 10 Posted March 21, 2006 Fez, can highly recommend Gwerks for all things G. Definatly your best bet, especially if you can get it done through dubbusiness! darren, respect to you for offering up the names of other places to go. :notworthy: Quote Share this post Link to post Share on other sites
kevin 0 Posted March 21, 2006 where 2?coedcae lane industrial estate pontyclun,M4 junction 34, about 20 mins drive from where you live mate. come off at 34 head for llantrisant,straight throu two sets of traffic lights,first left at round about,straight across the next,straight on at lights,first left here at next roundbout,yet another round about you need to take the second exit to codecae lane,but be carefull this looks like the first exit so take it "oposite loreal's factory". 50 yards turn left right by TNT parcels, small few ind. units,first right and its on your left. regards kevin Quote Share this post Link to post Share on other sites
iow_corrado_g60 0 Posted March 21, 2006 hello mate darren who has posted earlier is the best for hauling over the g-lader! im sure he'd also mail order it to you if you took it off and sent it to him! Quote Share this post Link to post Share on other sites
Fez 0 Posted March 21, 2006 thanks for all your help guys. Satrs the lot of ya. :D I was reading another thread earlier on the forum, so I am gonna check if anything is lose first (fingers cross). Anyways, how much will have the charger taken to a stage 4 set me back, roughly? Quote Share this post Link to post Share on other sites
bristolbaron 10 Posted March 21, 2006 £500 i believe. [edit] stolen directly from g-werks.co.uk G60 G-lader Full service porting/polishing In addition to the above work this service includes porting/polishing of the internal chambers and exhaust of the unit this helps to aid air across the non oil fed top shaft bearings and to increase the flow of air through your unit. £500 Inc VAT. Quote Share this post Link to post Share on other sites
Fez 0 Posted March 21, 2006 will keep in touch then when I've had chance to get the charger off and see if theres any play in the bearing Quote Share this post Link to post Share on other sites
Fez 0 Posted March 23, 2006 Please forgive my thickness as I know jeff all about engines. But what actually will a stage for do for the C? More BHP, Torque, etc? Quote Share this post Link to post Share on other sites
billinjah 0 Posted March 23, 2006 betterair flow combined with other mods than increase flow will give gains. Quote Share this post Link to post Share on other sites
