bensurf 0 Posted June 23, 2006 I need to check the oil pressure of my C, ive read somewhere that you can change the function of the mfa by doing this... Start Motor Move the MFA selector to "2" Press and hold the MFA end button (keep holding) Stop motor Start Motor Release the MFA end button. Press the MFA End button one time. and i was wondering if the oil pressure is one of the new functions, also do you know the correct pressure of a 2.0 16v? Thanks Quote Share this post Link to post Share on other sites
Walesy 0 Posted June 23, 2006 That procedure is for the Boost check , not oil pressure as far as I know matey. Quote Share this post Link to post Share on other sites
Crasher 3 Posted June 23, 2006 That’s for reading MFA live data such as road speed, engine vacuum/boost, distance etc. The Corrado has no dynamic oil pressure sender apart from two switches, one for 0.3 bar (pressure to open) and one for 1.8 bar (pressure to close). There is wiring for a dynamic pressure sender but it is a rare option. I have a Corrado VR6 auto in at the moment with the OE option volts/oil press instruments in the centre consul. Quote Share this post Link to post Share on other sites
