billinjah 0 Posted August 5, 2006 installing a ps2 and clarion screen today anyone know why the screen flickers so you cant see the picture? using a joytech car power adapter. it flickers whether car is off or on. Quote Share this post Link to post Share on other sites
Stan 24v 0 Posted August 5, 2006 Did you test it BEFORE installing it? Quote Share this post Link to post Share on other sites
Stan 24v 0 Posted August 5, 2006 Can you describe the flickering a bit more? What have you got the PS connected with? I mean scart, coax etc Quote Share this post Link to post Share on other sites
billinjah 0 Posted August 5, 2006 s''ok sorted it need a different lead still can get and sound out of it though?? Quote Share this post Link to post Share on other sites
Stan 24v 0 Posted August 5, 2006 Same question then, what leads are you using? Are they separate phono leads or are you using a combined lead ie scart? See where Im going with this ;) Quote Share this post Link to post Share on other sites
billinjah 0 Posted August 5, 2006 i cant get any sound at all from the unit either through the rca's or through the speaker wires? Quote Share this post Link to post Share on other sites
Stan 24v 0 Posted August 5, 2006 Sounds like an internal problem then mate. The amp inside may be knacked, or there may just be a loose connection inside. Whip the lid off and see if you can see anything, if not have a look for a repair place near you. They can normally stick it on a test bench and tell you straight off. Quote Share this post Link to post Share on other sites
billinjah 0 Posted August 5, 2006 ok cheers stan thats what i feared! Quote Share this post Link to post Share on other sites
