matthewb1985 0 Posted August 23, 2006 What is the bes way to clean the throttle body and is it worth replacing the throttle switch while its off. Also how do i go about porting and polishing, using counter sunk screws etc? any advice appreciated Quote Share this post Link to post Share on other sites
Deluk 0 Posted August 23, 2006 carb cleaner my man your 2nd question i wish to know that too Quote Share this post Link to post Share on other sites
fla 9 Posted November 7, 2006 Mmm, I've got a spare VR throttle body and also want to know where to port and polish it. If anyone has a "before" and "after" pic with the relevant areas marked that would be a help. As is, i cant see where anything would need to be machined. Quote Share this post Link to post Share on other sites
steveo29 0 Posted November 7, 2006 carb cleaner or thinners i ported mine out with a dremel....just smooth and remove anything that looks in the way... i also slimmed down the spindles and screw heads Quote Share this post Link to post Share on other sites
Dec 1 Posted November 7, 2006 :offtopic1: [OT]Do 2.0L 16v TB's have a throttle position sensor on them? [/OT] Quote Share this post Link to post Share on other sites
nocrap 0 Posted November 7, 2006 it has a switch that makes contact at full throttle, if thats the one Quote Share this post Link to post Share on other sites
Supercharged 2 Posted November 7, 2006 No throttle potentiometre tho... I think only the ABF got these... Quote Share this post Link to post Share on other sites
