AB 0 Posted October 3, 2006 sorry for asking a simple question not worked on a vr before, servicing a mates this weekend, to remove the plugs do you have to have a special tool or can you do it with out. if you need a tool would anyone locally lend me their tool inexchange for a couple of beers. thanks. Quote Share this post Link to post Share on other sites
Taggart 0 Posted October 3, 2006 You need a special tool to remove the leads (plastic thing about 7" long) you can get a metal one that works better. To remove the plugs is the same as any other. Quote Share this post Link to post Share on other sites
Son of a Beesting 0 Posted October 3, 2006 I believe you do need the tool to do it correctly. If you dont it can lead to trouble in the future Quote Share this post Link to post Share on other sites
CorradoVR6-Turbo 0 Posted October 3, 2006 The tool is just to remove the plug leads as they are deep in the head,and by pulling on the leads you may separate the lead from the cap. EDIT ....bugger Quote Share this post Link to post Share on other sites
AB 0 Posted October 3, 2006 ok. thanks for that. if anyone has got one i could borrow that would be great. thanks for correcting me tho. Quote Share this post Link to post Share on other sites
dr_mat 0 Posted October 3, 2006 Should be a plastic tool attached to the bonnet stay .. or in the kit with the jack .. or something. It's not very good, but it's better than nothing. Quote Share this post Link to post Share on other sites
Taggart 0 Posted October 3, 2006 dr_mat, , how big is your plastic tool? Quote Share this post Link to post Share on other sites
CorradoVR6-Turbo 0 Posted October 4, 2006 :lol: Quote Share this post Link to post Share on other sites
