dubcharger 0 Posted March 27, 2007 Im wanting to remove the plastic door/side strips and just want to know what stuff I need to remove the sticky sponge underneath Quote Share this post Link to post Share on other sites
Walesy 0 Posted March 27, 2007 Autogleam tar and glue remover, plus alot of elbow grease. Quote Share this post Link to post Share on other sites
Guest Posted March 27, 2007 people swear by using a hot hair gun too, but obviously use with care Quote Share this post Link to post Share on other sites
dubcharger 0 Posted March 27, 2007 thanks gents,i'll get on it :doc: Quote Share this post Link to post Share on other sites
mattman g6o 0 Posted March 28, 2007 i used a hair dryer and white spirit to get the glue off when i removed mine Quote Share this post Link to post Share on other sites
Walesy 0 Posted March 28, 2007 Yeah i warm them up with a hairdryer too, it's a bit less risky than a heatgun! - I'd be bound to set the car on fire with one of them!11! Quote Share this post Link to post Share on other sites
Guest Posted March 28, 2007 with care! and if you need to make a hole in a piece of paper, use bluetac behind the pencil, or ask an adult to help you. Quote Share this post Link to post Share on other sites
Owen VR6 0 Posted April 12, 2007 How do you get the plastic bit off in the first place? i was looking at mine today and they seemed like they were attached fairly well Quote Share this post Link to post Share on other sites
dinkus 10 Posted April 12, 2007 They are just stuck on, so as suggested above - a hairdrier to warm it up and carefully prise off. Quote Share this post Link to post Share on other sites
Owen VR6 0 Posted April 12, 2007 Nice one! i shall try carefully! Quote Share this post Link to post Share on other sites
timg60 0 Posted April 12, 2007 And make sure some bloody muppet hasnt resprayed around them........................................ Quote Share this post Link to post Share on other sites
