alex darcy 0 Posted March 27, 2007 im stripping the black interior out of my old red one to fit in my new blue one which has grey interior. iv managed to take everything else out without damaging anything but im stuck trying to remove the plastic which runs down the pillars and above the side windows. iv unbolted the seatbelt at the top but the knob for the slider has to come off to remove the plastic. iv tried pulling but iv got this far without breaking anything, i dont want to start now, other thing is the grab handle, how does this come off?? thanks alex Quote Share this post Link to post Share on other sites
vwdeviant 0 Posted March 27, 2007 Ah a thred with "Knob" in it... Dinkus will be along shortly.. :) They just pull off mate... Or in my case get the missus to knock them off...and lose them.. Quote Share this post Link to post Share on other sites
Mave 0 Posted March 27, 2007 They're just clipped in. Quote Share this post Link to post Share on other sites
dinkus 10 Posted March 27, 2007 You called? :) Yup, just pull very hard. Insert witty comment about pulling one off/knocking one out :lol: Quote Share this post Link to post Share on other sites
vwdeviant 0 Posted March 27, 2007 You called? :) Yup, just pull very hard. Insert witty comment about pulling one off/knocking one out :lol: Dinkus seriously change you Aviatar to Finbar Saunders!....! Quote Share this post Link to post Share on other sites
alex darcy 0 Posted March 27, 2007 cheers guys.. what about the grab handle above the door?? Quote Share this post Link to post Share on other sites
Mave 0 Posted March 27, 2007 Get a flathead screwdriver to take off the cover, then unscrew the screws underneath and it'll pull out. Careful when pulling the covers off though, as they'll probably go flying. Quote Share this post Link to post Share on other sites
alex darcy 0 Posted March 28, 2007 Get a flathead screwdriver to take off the cover, then unscrew the screws underneath and it'll pull out. Careful when pulling the covers off though, as they'll probably go flying. flying!! lol iv lost one now, it shot straight out the car.. not to worry, all sorted now. cheers fellas, found the best way to get the knobs off was to put a spanner behind them and lever them off. just the dash left to do but ill leave that for the weekend me thinks Quote Share this post Link to post Share on other sites
dinkus 10 Posted March 29, 2007 Don't forget the bolts for the dashboard in the engine bay! There's uh 1 or 2 on the bulkhead that hold the dash it. Nearly everyone doesn't realise they're there and just undoes the inside ones and hauls on it :lol: Quote Share this post Link to post Share on other sites