Vagcom codes

[andygal 0]

Hey,

 

Scanned my Corrado VR6 1994 today with vagcom and got the following codes. Can ayone please give me any info as to what they mean and how to sort them. Have cleared them and they came back.

 

3 Faults Found:

00533 - Idle Speed Regulation

10-10 - Adaptation Limit Not Reached - Intermittent

00522 - Engine Coolant Temperature Sensor (G62)

29-10 - Short to Ground - Intermittent

00513 - Engine Speed Sensor (G28)

03-00 - No Signal

 

I no the G28 will be due to the fact the engine was off when scanned but looking for info on the other two.

 

Cheers in advance,

 

Andy

[dr_mat 0]

00533 - Idle Speed Regulation

10-10 - Adaptation Limit Not Reached - Intermittent

00522 - Engine Coolant Temperature Sensor (G62)

29-10 - Short to Ground - Intermittent

 

Check the wiring on the coolant temperature sensors and replace them if necessary. They're on the thermostat housing, there's several sensors.. I think the one you want is the blue one ..

The idle speed adaptation limit not reached is probably due to a sticky/stuck ISV.

[Supercharged 2]

Yip - worth changing the BTS anyways...

 

Clear the codes and re-scan in a week, does the car drive ok??

[andygal 0]

hey whats the BTS's?? Car doesnt start first time and also idles high around 1200rpm.

 

Cheers,

 

Andy

[Supercharged 2]

Sorry - BTS = Blue Temp Sender (Coolant Temp Sender from ECU on VW's)

[Rob Heath 0]

Blue temp sender

[dr_mat 0]

Car doesnt start first time and also idles high around 1200rpm.

 

Yep, that would be about right.