andygal 0 Posted January 19, 2008 Hey, cleaned my engine bay with some gunk and water from the hose yesterday and ever since iv had running problems. First was the car was misfiring. This was put down to a wet HT lead causing misfiring so as i had a new set i put them on and it cured it. The engine was dried with compressed air and the connectors given a spray with WD. Now, when cold, the car shudders when accelerating until it gets warm. Also for the first few minutes, it stalls when the revs get below 1500K Any ideas whats wrong?? no errors with vagcom and temp sensors are brand new!! Cheers, Andy Quote Share this post Link to post Share on other sites
nocrap 0 Posted January 19, 2008 Must be water there still somewhere, distributor?.......what car? Quote Share this post Link to post Share on other sites
andygal 0 Posted January 19, 2008 1994 VR6. got a coilpack - you think there wil be water in there and would that cause this?? Andy Quote Share this post Link to post Share on other sites
AlgarveVR6 0 Posted January 20, 2008 Hi Possibility you might have a leak on the coilpack made worse by being damp. Worth a look in the dark Dic Quote Share this post Link to post Share on other sites
