cvw74 0 Posted December 6, 2008 Is it possible to get a shallow sump for the VR6? So I can not drive like a nervous wreck :D Quote Share this post Link to post Share on other sites
dukest 0 Posted December 7, 2008 to be honest i always find that the cat guard is the thing that scrapes first on mine. if you want a different sump, kev (cheesewire) did a write up on the VR6 Owners Club forum about whats needed to fit the r32 sump which is angled and marginally shallower (although ironically more prone to damage due to what its made of).. Quote Share this post Link to post Share on other sites
_leon_ 0 Posted December 7, 2008 search for baffled sump on here - youll find the thread that has the r32 sump discussion as john says - its shaped differently - and will actually sit above the subframe - so hitting it would be extremely unfortunate. the main draw to it though is the fact its baffled. i've fitted it and had no problems - its a good mod. Quote Share this post Link to post Share on other sites
coullstar 0 Posted December 7, 2008 Note this must be a Mk5 R32 sump not the Mk4 as I found out. You need the oil pick up and pump as well. The baffled sump topic will tell you the part numbers. Quote Share this post Link to post Share on other sites
Kevin Bacon 5 Posted December 8, 2008 R32 baffled sump - 022 103 601R R32 oil pump - 022 115 105E R32 oil transfer pipe - 021 115 203 Sump sealant - D176 404 A2 Quote Share this post Link to post Share on other sites
