Quick question about 4 studs & standard Speedlines..

[Jim 2]

Hi Guys,

 

I was reading the thread in the for sale section, where Gus is selling those Porsche alloys. And even though they are 5 stud wheels, you can buy an adaptor to convert a 4 stud car to fit them.

 

Does such a thing exist that will let fit 5 stud Speedlines onto a 4 stud car?

 

I know that this has been talked about much before, and it was said that its normally a hell of a lot of work to make 5 stud Corrado wheels fit onto 4 stud Corrado hubs (loads of things you'd have to replace) - so why isn't there just an adaptor, just like those Porsche wheels have, to do the same thing?

 

Ta!

[andycowuk 0]

these porche adaptors are £200+ from H&R, but you could do the conversion using vag parts for less.

 

Another reason may be to do with the PCD of the vw 5 stud. The porche is 5*120, and the vw is 4 stud is 4*100, so there is 20mm to put the 4 bolts through the adaptor into the vw hub, and then the wheel bolts round the outside of the 4 countersunk bolts. IF the vw is 5*100 then at some point on the wheel the countersunk bolts will be in the way of the wheel bolts.....does that make sense?

[aposegil 0]

andy just to correct you

 

Porsche is 5 x 130

 

BMW is 5 x 120

 

Merc and some passats are 5 x 112

 

and VW and audi is 5 x 100

and 4 x 100 and 4 x 98

 

as for you Jim you cant really get quality kits for the 4x100 to 5x100

 

to do that youll need to change the rear disks to vr 5x100

 

also the front to golf mkIII gti 5x100 hub and disks and bingo your done

[PhatVR6 0]

Just fit 5 stub hubs and rear discs if you want 5 stud wheels.

[vr6storm 0]

should have bought a VR then jim :wink: :-P ..........seriously tho another way might be to buy 4-stud speedlines in a design very similar to the VR ones.....i'm pretty sure they do them :wink:

[PhatVR6 0]

Like Compomotive MO's for instance.

[vr6storm 0]

Like Compomotive MO's for instance.

 

 

Thats the ones :wink: :lol: :lol:

[Jim 2]

Any idea on some links to some sensible online stores who sell those kinda wheels?

 

Only place I have found so far is performancealloys.com, and their prices are a bit eye-watering! :(

 

Er.. actually don't worry. Had a look for some pics and I am not too keen on the compomotives!

[MikeVR6 0]

Take a look at the Speedline Chrono wheel on this website.

 

http://www.speedlinecorse.co.uk/

 

I've the 16" version on my Corrado.

[Jim 2]

Mike,

 

Can you tell me where abouts I can find somewhere to get prices for Speedline wheels?

 

The Corrado I am buying used to have Speedline Competition 2 alloys on it, and I REALLY liked them. I wouldn't mind finding prices for them again....

 

Those Speedlines look pretty good on your motor as well m8 :)

[Henny 0]

Google is your friend!!! :wink: :roll: :lol:

 

Try HERE! 8)

[dubster82 0]

sounds like you want some 2010's then jim :D

[Jim 2]

No... 2108's mate.

 

I like the original Speedlines, but those Competition 2's are just soooo nice :)

[MikeVR6 0]

I bought mine second hand, so I never dealt with a Speadline dealer.

 

The only place I know is Performance Alloys, but as you say, they're abit pricey :mad: