Jim Bowen 1 Posted June 21, 2010 Is this possible, some one has managed to move mine in the garage and decided to place them face down on top of a metal hinge and scratch one of them.......idiots. I had a machine polisher, and wondered if its possible to polish them? what would people suggest Quote Share this post Link to post Share on other sites
shawshankkid 1 Posted June 21, 2010 depends on the deepness of the scratch....machine polish with menzerna and steady as you go until removed...deeper ones can still be removed but you may see a slight bow in the acrylic. Quote Share this post Link to post Share on other sites
Jim Bowen 1 Posted June 21, 2010 i';ve taken some 1500grit sand paper to it now, not sure on the out come yet Quote Share this post Link to post Share on other sites
Kempy 0 Posted June 21, 2010 are the covers from a group buy? Quote Share this post Link to post Share on other sites
g60jaime 10 Posted June 21, 2010 Meguiars do a plastic polish for lights and all things acrylic. I think it is called Pastic-X. I used it when I wet and dried the lacquer on my all red rears and worked fine. Did a nice job on the lower unlacquered bits of the lights too. Quote Share this post Link to post Share on other sites
Kempy 0 Posted June 21, 2010 meg stuff is good my mate uses it Quote Share this post Link to post Share on other sites
mattnorgrove 0 Posted June 21, 2010 Yep, Megs Plast-X is well worth a go, good on the front indicators too. Quote Share this post Link to post Share on other sites
