adding key fob to corrado locks???

[vwfil 0]

anyone done this?

 

looking at doing it myself but a little unsure on where to start could do with some advice?

[vwfil 0]

seriously not one person can give me any advice on the subject? :confused4:

[nocrap 0]

what do you actually mean? fitting a mk4 style fob to the standard key?

[mimjed 0]

Remote central? Mine is done through the alarm/immob (best route in my opinion).

 

Or you can buy universal kits to fit yourself. Unsure of quality or how reliable on these though.

[vvxifeng16 0]

I very much agree with the above mentioned .. I will continue to monitor the

[vwfil 0]

what do you actually mean? fitting a mk4 style fob to the standard key?

 

just adding a remote to the existing central locking system only works from the key in the door at the min theres the obvious halfords remote and reciver kit but didnt know how to connect it is it possible to connect it to the central locking pump or do i have to connect it elsewhere?

[waltermarshall 10]

anyone done this?

 

looking at doing it myself but a little unsure on where to start could do with some advice?

 

I also need advice

Edited March 8, 2019 by waltermarshall

[fendervg 33]

There's a sender wire for remote central locking to be connected to - have this on my car with an after market alarm (Meta HPA). You can also get fob key blanks similar to the later switchblade style ones that can be cut to the AH key profile and have programmable buttons.

 

But fitting remote central locking and even total open/closure on the button is possible and relatively easy.

[Jon_vr6 1]

I've got a right-click central locking module installed works brilliantly.