Help needed with aux water pump

[Corradoooh! 10]

Hi there,

top site.

I just replaced my Corrado leaky aux water pump. The thing is, now that it's back together, is there any way of testing that it's working. I've tried listening after a run but silence. I just put that down to it having a nice new pump.

 

Any tips for a newby are much appreciated.

 

Also my driver window motor has died and am flumoxed as to how i take it off the replace. Is the replacement a sirrocco motor?

 

Many thanks.

 

It is the most fun car i've ever owned.

[daves16v 1]

The pump usually runs with the ignition on only and you should still hear a new pump working. Pull the plug off and give it a 12v supply.

[Corradoooh! 10]

Hi Dave, thanks for the help, i'll give it a go.

 

martin

[Jim Bowen 1]

i fitted a new one and can hear it as soon as the ignition comes on

[fendervg 33]

It's not loud - but with the ignition on you should hear a gentle hum as the pump works away - testing voltage on the plug is your best bet. I usually run these kind of things off the car as a test before fitting. Mine was making a terrible rattling noise before I replaced it.

[Corradoooh! 10]

Thanks for the tips. I put 12 volts and a gentle tap on it and it whizzed up fine.

 

Now it's a problem with the window.

 

If it's not one thing.... It's just another reason to love the car.