stenninski 10 Posted July 4, 2011 hi guys, i have a 1.8 kr rado and im going to be changing the bottom end for the 2.0 9a block but just wondered if anyone knows if it is a straight swap. just curios of pulleys and all the oil and water channels lining up with the kr head. thanks Quote Share this post Link to post Share on other sites
andycowuk 0 Posted July 5, 2011 pretty certain its a straight swap... Quote Share this post Link to post Share on other sites
swiftkid 1 Posted July 5, 2011 Yes it is, its a common conversion. Is there a particular reason your just swapping the bottom end? if your doing the KR cam mod you can just swap the cams over without having to swap heads Quote Share this post Link to post Share on other sites
stenninski 10 Posted July 5, 2011 cheers guys nice easy swap. mines ruuning k jet so was gonna keep the head and fuel system heard this is the best combo Quote Share this post Link to post Share on other sites
andycowuk 0 Posted July 6, 2011 you can run 9a complete lump on k-jet, and just swap the cams - i did same with a abf in a mk2 on k-jet, went rather well! Quote Share this post Link to post Share on other sites
