fizzle89 0 Posted July 26, 2011 Hi Guys! I am looking to replace my heater matrix which as far as i'm aware has never been replaced. My corrado is a 16v G reg 90-91". I have a couple of questions before I go ahead with this and was hoping that you may be able to help. Firstly my heater is not working correctly. I have air coming from the heater however it only blows out towards the footwell and towards my face. It will not demist the window. Is this likely to be a cable that has snapped? Does it have heater control cables like the old mk2's golfs? And as for replacing my heater matrix, is there anything you would advise on buying in advance parts wise? Cheers for reading Jazz Quote Share this post Link to post Share on other sites
floppyman 0 Posted July 26, 2011 The heater is controlled by cables (just like mk2) It can be the cables, or the clips that hold the cables, or the flaps.... You never know, until you take it apart and check... Sorry not much help but mine is like that for 6 years now. Quote Share this post Link to post Share on other sites
dragon green 4 Posted July 26, 2011 Have a read of this http://the-corrado.net/showthread.php?45452-Replacing-the-heater-matrix-non-canada-style-max-pics directional flow is sometimes caused by the cog "jumping" a few teeth ! its all fixable,and will come clear when you have the dash out Quote Share this post Link to post Share on other sites
Andi 2,147,483,647 Posted July 26, 2011 http://wiki.the-corrado.net/heater_matrix_replacement.html Quote Share this post Link to post Share on other sites
fizzle89 0 Posted August 2, 2011 awesome guys! Thanks for the links. Will get to it next weekend and print this off i think :) wish me luck! will post the outcome at a later date. Quote Share this post Link to post Share on other sites
