easypops 8 Posted September 23, 2011 I'm looking for the small blue solenoid valve which sits under the MAF, connects with pipework to the PCV and the carbon cannister, has a darker blue electrical plug Couple of (bad) photos here http://the-corrado.net/showthread.php?58314-Solenoid-that-sits-under-MAF-95-VR6 :wave: Quote Share this post Link to post Share on other sites
C5 OEM 0 Posted September 23, 2011 :wave: Got it mate i`ll take it off tomorrow and pm you Quote Share this post Link to post Share on other sites
RW1 0 Posted September 23, 2011 :wave:Got it mate i`ll take it off tomorrow and pm you And it threw no faults in VCDS when tested yesterday. :) . Quote Share this post Link to post Share on other sites
CazzaVR 0 Posted September 23, 2011 Does it have the sill protectors with the Corrado inscription? If so, how much? Quote Share this post Link to post Share on other sites
C5 OEM 0 Posted September 23, 2011 Does it have the sill protectors with the Corrado inscription? If so, how much? sold mate Quote Share this post Link to post Share on other sites
lilfuzzer 1 Posted September 23, 2011 Hi Andy also my mate after a standard airbox top if you willing to split it if not how much for tht posted? cheers Quote Share this post Link to post Share on other sites
easypops 8 Posted September 23, 2011 C5 OEM Got it mate i`ll take it off tomorrow and pm you RW1 And it threw no faults in VCDS when tested yesterday. Sounds good to me :) Quote Share this post Link to post Share on other sites
volksworld13 0 Posted September 23, 2011 hi fella rad support metal work that the rad sits in ,/, ideally rust /damgae free. price posted? vr6 gearbox! mileage and condition, cruncy gears,noise ect, price posted? vr6 starter motor condition price posted? center console trim that houses the radio,controls? condition price posted ? heater controls condition? price posted? Quote Share this post Link to post Share on other sites
James. 9 Posted September 24, 2011 Hi Andy Looking for a pair of black plastic covers. The ones that clip over the front seat runners, along the centre tunnel. And also the front black plastic strut cap covers. Thanks in advance, James Quote Share this post Link to post Share on other sites
C5 OEM 0 Posted September 24, 2011 hi i need a rad support metal work that the rad sits in ,/, ideally rust /damgae free. price posted? vr6 gearbox! mileage and condition, cruncy gears,noise ect, price posted? vr6 starter motor condition price posted? center console trim that houses the radio,controls? condition price posted ? heater controls condition? price posted? heater controls 55 posted. centre console is cracked anything off the engine or metal work wont know till i strip it down further and i`ll update the thread thanks andy ---------- Post added at 01:52 PM ---------- Previous post was at 01:51 PM ---------- Do you still have the speedo binacle screw covers, passenger side?? have these and the speedo surround, selling as complete for 20 posted ---------- Post added at 01:53 PM ---------- Previous post was at 01:52 PM ---------- Depending on condition interested in the following. Any chance you could get us some pics. cheers 1. rear subframe 2. front wishbones 3. front hub housing considering stripping all these off and selling them powder coated,, ---------- Post added at 02:20 PM ---------- Previous post was at 01:53 PM ---------- hi andy also my mate after a standard airbox top if you willing to split it if not how much for tht posted? Cheers no airbox mate ---------- Post added at 02:54 PM ---------- Previous post was at 02:20 PM ---------- Hi Andy Looking for a pair of black plastic covers. The ones that clip over the front seat runners, along the centre tunnel. And also the front black plastic strut cap covers. Thanks in advance, James all missing mate Quote Share this post Link to post Share on other sites
Big Adam 0 Posted September 25, 2011 how much for the rad and door handles? can collect. im away untill sunday but shotgun them do you have the rad and door handles? Quote Share this post Link to post Share on other sites
C5 OEM 0 Posted September 25, 2011 do you have the rad and door handles? rads spoken for and the handles are broke sorry mate Quote Share this post Link to post Share on other sites
soul 10 Posted September 25, 2011 just bought a vr6 today - drivers front seatbelt anchor not working, have you got the one on your breaking car? Quote Share this post Link to post Share on other sites
C5 OEM 0 Posted September 26, 2011 just bought a vr6 today - drivers front seatbelt anchor not working, have you got the one on your breaking car? yes mate,i`ll remove and pm you Quote Share this post Link to post Share on other sites
M15 VW 0 Posted September 26, 2011 (edited) Noooooooooooooooooo!!!!!! :.....( What's happened to it??? Took me 5 years to get him to show car standard !!! :.....( ---------- Post added at 04:07 PM ---------- Previous post was at 03:57 PM ---------- I should say from a bare shell to a running car and to show standard :.( Edited September 26, 2011 by M15 VW Quote Share this post Link to post Share on other sites
soul 10 Posted September 26, 2011 thanks C5 OEM look forward to it. Quote Share this post Link to post Share on other sites
C5 OEM 0 Posted September 27, 2011 (edited) updated on first page Edited September 27, 2011 by C5 OEM Quote Share this post Link to post Share on other sites
Pete 0 Posted September 27, 2011 what brand are the tyres, and how much tread/wear is there??? Quote Share this post Link to post Share on other sites
C5 OEM 0 Posted September 27, 2011 what brand are the tyres, and how much tread/wear is there??? some spurious make and all about 5-6mm all round Quote Share this post Link to post Share on other sites
Pete 0 Posted September 27, 2011 Is postage on the cards for them as I'm all the way in Swansea? Are the wheels true and kerb-free? Quote Share this post Link to post Share on other sites
C5 OEM 0 Posted September 27, 2011 Is postage on the cards for them as I'm all the way in Swansea? Are the wheels true and kerb-free? they ran fine when i drove it, yeah i could post Quote Share this post Link to post Share on other sites
soul 10 Posted September 27, 2011 Did you mange to look at the drivers seat belt anchor and is the stearing wheel still available. Quote Share this post Link to post Share on other sites
C5 OEM 0 Posted September 27, 2011 Did you mange to look at the drivers seat belt anchor and is the stearing wheel still available. steering wheel available do you have a picture of the seat belt part..? not sure which bit you need thanks Quote Share this post Link to post Share on other sites
soul 10 Posted September 27, 2011 (edited) I'll take a photo tomorrow but it is the bit that fastens to the seat that you clip the seat belt into. last photo on yout first post has the seat belt bit I am after right in the middle. Edited September 27, 2011 by soul Quote Share this post Link to post Share on other sites
ozowen 2 Posted September 27, 2011 Hya, Did the car have the beige carpets, if so have you got the clips / studs that hold the carpet down in both footwells. If you have how much plse Kind Regards Oz Quote Share this post Link to post Share on other sites