Redfox 10 Posted October 2, 2011 (edited) Hi all, Thinking if I had some spare g-ladders and if I had the needed new spares, would it then be possible to renovate them myself? Cheers, Redfox. Edited October 2, 2011 by CazzaVR Quote Share this post Link to post Share on other sites
northG60 0 Posted October 2, 2011 Im pretty sure the bearings and seals are pretty damn expencive.......... but yeah you can do it yourself Quote Share this post Link to post Share on other sites
mimjed 0 Posted October 2, 2011 You can do it yourself, kits on ebay were around 180-200 last time i saw them. Quote Share this post Link to post Share on other sites
monzablau16v 0 Posted October 2, 2011 there is a guide on matey matey forum: http://www.matey-matey.com/g60-rebuild-article.shtml Quote Share this post Link to post Share on other sites
northG60 0 Posted October 2, 2011 Jabbasport sell the kit http://www.jabbasport.com/store/index.php?app=gbu0&ns=prodshow&ref=G-LADER37 BBM sell the kit http://www.bahnbrenner.com/vw_audi/products/623/OE_Spec_G60_G_Lader_Rebuild_Kit Bar-Tek also sell it http://www.bar-tek-tuning.com/lshop,showdetail,19576,en,1317561335-19576,g-lader.1127109965.1127108351,1260009,4,Tshowrub--g-lader.1127109965.1127108351,.htm not too expence actually...... Quote Share this post Link to post Share on other sites
steveo29 0 Posted October 2, 2011 http://www.ebay.co.uk/sch/vwg60tuning/m.html?_nkw=&_armrs=1&_from=&_ipg=&_trksid=p3686 Quote Share this post Link to post Share on other sites
mikkijayne 0 Posted October 2, 2011 Dead easy. Just make sure you take your time, keep everything nice and clean and have the proper tools available (circlip pliers etc). Pretty simply to mildly port it while its open if you have a dremel or something similar :) Quote Share this post Link to post Share on other sites
