More POWER.....

[task 0]

I AM LOOKING FOR MORE POWER. I WANT TO GET RID OF MY C.G60 AND GO FOR A VR6. which later I want to fit a turbo for. has any one done that ? and which is the best deal on a turbo for a vr6 out there?

[aposegil 0]

mate seriously you can get as much power out of a turbo g60 as you can from a vr6 and it should even be easier and cheaper to

[task 0]

do you mean to fit a turbo on my corrado g-60 along with the supercharger?

[dr_mat 0]

But I'll wager you can get more power out of a turbo VR6 than a turbo G60.. ;)

[task 0]

thats what I thought also dr-mat , do you know any good deals on a turbo?

[Jim 2]

You can get like 220BHP out of a G60 with a little work, and not a huge amount of money.

 

220BHP not enough?!

[BeavisJem 0]

how much are you looking to spend to get 220

 

i ahve a stage 4 charger but no chip or pulley. whats the next step

[aposegil 0]

dr mat yes u can get more power if the money spent etc but look at Guy storm to get a N/A to run well as a f/i car is alot of hard work and money

 

As for a g60 there is plenty of guys in america etc that remove the charger and run a turbo setup and get lots of power and not so much headache

 

also when u loook at power to weight ratio, and how much power you can put down on the front wheels so but i would go for a turbo g60 over vr any day or even better x flow g60 turbo :D

[scruffydubbers 0]

How much power do you want?

 

dont forget its only FWD

[biggerbigben 0]

mate seriously you can get as much power out of a turbo g60 as you can from a vr6 and it should even be easier and cheaper to

 

yeah yeah..blah blah...20vt is what you need my man.. :D :D

[task 0]

20v turbo.. sounds like pure power. which vw engine do you have? is it a vw engine?

[LowG 0]

mate seriously you can get as much power out of a turbo g60 as you can from a vr6 and it should even be easier and cheaper to

 

yeah yeah..blah blah...20vt is what you need my man.. :D :D

 

so how much have you spent on a 20vt conversion mate :? , for a guy who cant do the work himself or has no time or space doing such conversion would cost into 4k+ by a proffesional garage, then you have to spend money on big turbo, injectors, boost controller chip ect ec to get things moving................ whereas tuning a g60 either with a turbo or keeping the charger would work much much cheaper, maybe not the same max power in the end but a respectable number for a fwd car which wont break your bank either.

[task 0]

 

You can get like 220BHP out of a G60 with a little work, and not a huge amount of money.

 

220BHP not enough?!

Definetly enough! . Do you mean making it a stage 4 charger,and changing the pully or is there more stuff to be done?

.

sorry for the double posting, I

got confused where to put the topic on the index.

[elwigglero 0]

charger rebuild, stage 4, 68mm pulley, chip, FPR, ralley outlet and new cams will put you up above 220 easy

-stick with the g60

[task 0]

I know that the 68mm pulley can effect on the supercharger lifespan. how true is that?

[stormseeker 0]

You can get much more power from a VR6 turbo, but you need serious ££££££ for the uprated internals and rebuild.

 

http://www.stealthracing.co.uk/sr_pvr6.html

 

Whether you'd be wise to put this much power through a FWD setup is another matter altogether :?:

[predator 0]

low g,you say you supply chargers .have you got any at the moment cos i need one

[stormseeker 0]

I know that the 68mm pulley can effect on the supercharger lifespan. how true is that?

 

Some good info in this thread:

 

http://the-corrado.net/.archive/forum/viewtopic. ... sc&start=0

[dr_mat 0]

dr mat yes u can get more power if the money spent etc but look at Guy storm to get a N/A to run well as a f/i car is alot of hard work and money

 

also when u loook at power to weight ratio, and how much power you can put down on the front wheels so but i would go for a turbo g60 over vr any day or even better x flow g60 turbo :D

 

I'm well aware that bang for buck, modifying a G60 is CHEAPER than modifying a VR.

 

But the guys' question, however, was about adding a *turbo*. I'm sure you'd agree that if you're going to the extent of adding a turbo, you can get MORE power from a VR6+turbo setup than from a G60+turbo setup.

 

I'm not gonna answer the question on power/weight, cos it's moot. And the general consensus of opinion is that the front wheels are only good for 250bhp anyway, any more than that is a waste of time.

 

Oh, and I'd also like to point out, it's not my argument! ;)

 

I bought a VR6, cos at the end of the day, there's no replacement for displacement! ;)

[LowG 0]

low g,you say you supply chargers .have you got any at the moment cos i need one

 

yes mate pm sent :)

[dr_mat 0]

Hey, given the factions that form on this forum, perhaps we should form a splinter group for us 6-cylinder boys?

The people's front of judea?

[stormseeker 0]

"6pots for peace" ????

[Jim 2]

I can't understand why all these quarrels flare up about engines anyway..

 

Even as a G60 owner, I still prefer the VR6.. :)

 

*pokes hornets nest and walks away*

[biggerbigben 0]

mate seriously you can get as much power out of a turbo g60 as you can from a vr6 and it should even be easier and cheaper to

 

yeah yeah..blah blah...20vt is what you need my man.. :D :D

 

so how much have you spent on a 20vt conversion mate :? , for a guy who cant do the work himself or has no time or space doing such conversion would cost into 4k+ by a proffesional garage, then you have to spend money on big turbo, injectors, boost controller chip ect ec to get things moving................ whereas tuning a g60 either with a turbo or keeping the charger would work much much cheaper, maybe not the same max power in the end but a respectable number for a fwd car which wont break your bank either.

 

yeah, your totally right, I was just taking the mickey out of Alex... :wink:

 

(But the conversion itself including the engine was about £1200-1500,which is't too bad, admitably I did the work my self but still its not too much relatively speaking. The expensive bit was buying the bits for getting the BHP output up a little: EMS, engine mounts, turbo, piping, clutch etc)

[Bobbywhacker 0]

the judean peoples front!!! Gimme some badgers noses then