Macdaddy 10 Posted April 19, 2012 Front subframe and rear beam required as I'm joining the OCD powder coated crew. For VR6 Can collect around the NW for cash, what you got and where? Quote Share this post Link to post Share on other sites
Jim Bowen 1 Posted April 19, 2012 are you doing the front cross member as well? bit under the rad? Quote Share this post Link to post Share on other sites
Anton Sobriquet 0 Posted April 20, 2012 I have rear beam, subframe and front cross member all from a VR6. They're in Cambridge. You'd do better polymer coating them if the plan is preservation. Quote Share this post Link to post Share on other sites
Macdaddy 10 Posted April 20, 2012 I have rear beam, subframe and front cross member all from a VR6. They're in Cambridge. You'd do better polymer coating them if the plan is preservation. How much you after? Could you post or could i send a courier? Quote Share this post Link to post Share on other sites
Anton Sobriquet 0 Posted April 20, 2012 Don't know if it's fair pricing but I was thinking about £45 each, so say £125 for the 3? Courier collection would be fine. I also have VR6 wishbones in good condition, if you're interested in doing those, too... Quote Share this post Link to post Share on other sites
24V Renshaw 0 Posted April 20, 2012 I have both in Wilmslow. Was planning on stripping them down and getting them coated, but if you want them I am open to sensible offers :) I have to get a wishbone bolt removed which sheared off in the front subframe, but that shouldn't take too long. Feel free to get in touch to discuss options. Jay Quote Share this post Link to post Share on other sites
Macdaddy 10 Posted April 21, 2012 Don't know if it's fair pricing but I was thinking about £45 each, so say £125 for the 3? Courier collection would be fine. I also have VR6 wishbones in good condition, if you're interested in doing those, too... I'll find out the cost of a courier and get back to you, Pm'd Jay too as he's round the corner. Quote Share this post Link to post Share on other sites
Anton Sobriquet 0 Posted April 22, 2012 Sounds like Mr Renshaw's your man, really. I may take the opportunity to join the OCD crew myself... Quote Share this post Link to post Share on other sites
James. 7 Posted April 22, 2012 I'm joining the OCD powder coated crew. Your life (and wallet) will never be the same. Didn't have time to go ferreting under bonnets at the NW meet. What's yours like then ? Bung some pictures up, so we can see a before and after. Quote Share this post Link to post Share on other sites
ChrisL 17 Posted April 22, 2012 I joined this club the other week! Bought a complete rear beam off Ebay for £20 and sorted my own courier out for £48. Currently soaking in WD40 before I start to loosen the bolts and strip it. Quote Share this post Link to post Share on other sites
