Sam.l 0 Posted October 8, 2012 Has anyone had a stab at making one of these out of two standard grilles? Want to have a go but not sure where or how to start other than sourcing two grilles that is. Any advice? Thanks in advance all, Sam. Quote Share this post Link to post Share on other sites
jamie_300 0 Posted October 14, 2012 spoonfed make one already, unless you want to do it yourself? :) Quote Share this post Link to post Share on other sites
Sam.l 0 Posted October 14, 2012 Yeah seen theirs, would cost a bomb though by the time it gets here and I know people have made there own before. Just curious how to go about it really :-) Quote Share this post Link to post Share on other sites
Madwabbit 10 Posted October 15, 2012 I made mine. Let me find pictures...ill be back. ---------- Post added at 8:30 PM ---------- Previous post was at 8:17 PM ---------- I used a soldering iron and some left over plastic as a "welder" of sorts. Worked great and was an easy project. Quote Share this post Link to post Share on other sites
tentonhammer 10 Posted October 15, 2012 Pretty simple project this one really - See link below http://corradog60project.blogspot.co.uk/2012/01/g60-badgeless-grille-doing-it-yourself.html Good luck Quote Share this post Link to post Share on other sites
