Stonejag 10 Posted November 28, 2012 Hi all, I've gained a rattle in my driver's door, and I suspect the (very tired) fittings at the opening end have come loose again. I believe the plastic pop-rivet clips that hold the lower edge of the door card are 3A0 867 301, but what's the part number for the right-angled plastic parts that pop-rivet onto the door skin and accept the self-tapping screws through the edge of the door card? Also, how many do I need? I only have a couple left and it looks like there should be more... Cheers :) Quote Share this post Link to post Share on other sites
timthetinyhorse 0 Posted November 28, 2012 (edited) this any help? original image link is here if you need it bigger: http://s8.beta.photobucket.com/user/kayaksurfer_blyth/media/Untitled.jpg.html parts list for door cards (1) --------- no longer available / (1A) --------- no longer available / - 3A0867201H protective foil 1100X600X2 / - AKL43401925 double-sided adhesive tape 19MMX25M / 2 N 90157501 panel screw B4,2X25 / (3) 535867131 storage box left / 535867131 4FB black / (3A 535867133A storage box left / 535867133A 4FB black / 535867133A 9DK platinum / (3A) 535867134A storage box right / 535867134A 4YV light beige / 535867134A 9DK platinum / - 535831367 retaining bracket / storage box / see illustration: left 153 / - 535831368 retaining bracket / storage box / see illustration: right 153 / 4 N 0139622 oval head panel screw ST3,9X16-C / 5 N 0200321 plug A6X0,8 / 6 N 90157601 oval head panel screw / F >> 50-N-035 000* B4,2X45 / (6) N 01396626 oval head panel screw / F 50-P-000 001>>* 4,2X13STC / (7) --------- no longer available / (7A) 535867145C loudspeaker grille left / 535867145C 4FB black / 7 535867146A loudspeaker grille right / 535867146A 4FB black / 7A 535867146C loudspeaker grille right / 535867146C 4FB black / 9 191867166A clips / 10 321867169B cover cap / 321867169B 01C satin black / 11 533867170 washer / (12) 535867171 grab handle left / 535867171 01C satin black / 12A 535867172B grab handle right lhd / 535867172B 01C satin black / (12A) 536867172 grab handle right rhd / 536867172 01C satin black / (12A) 536867171A grab handle leather left rhd / 536867171A 1BX black -VA / 13 N 01414112 fillister hd. bolt M6X18 / 14 533867299 clip / F >> 50-N-035 000* / (14) N 0154292 snap nut / F 50-P-000 001>>* ST4,2X16,5X11 / 15 535867299B clips / 16 3A0867301 retainer / 3A0867301 01C satin black / (17) 535868503A molding for door trim panel left / 535868503A 01C satin black / 17 535868504A molding for door trim panel right / 535868504A 01C satin black / 18 --------- no longer available / 19 171857026A hexagon nut, shouldered M5 / 20 --------- no longer available / 22 N 90241203 fillister hd. bolt M4X20 / 21 N 90282501 Edited November 28, 2012 by timthetinyhorse Quote Share this post Link to post Share on other sites
Stonejag 10 Posted November 29, 2012 I'd got that far but it's one of the badly scanned pages... Best quality pic I've found is this: So is it item #15 then? :scratch: Quote Share this post Link to post Share on other sites
timthetinyhorse 0 Posted November 29, 2012 im presuming so yes....... where did you source that image from? I knew of a russian site online that had a good parts catalogue that was in better quality but havnt accessed it for a while Quote Share this post Link to post Share on other sites
Portent 0 Posted November 29, 2012 I asked at my dealers for some of these about 8 months ago and was met with the usual obsolete answer :( Quote Share this post Link to post Share on other sites
daves16v 1 Posted November 29, 2012 I've got some off my breaker. Quote Share this post Link to post Share on other sites
tentonhammer 10 Posted November 29, 2012 Stone - Use this instead: http://ifinterface.com/page/page3.php?langid=1 I've always found VAGCAT schematics to be a little crude (although perfectly useful). If you haven't got access to ETKA then the IFInterface system is def the way to go if you want clearer images. Quote Share this post Link to post Share on other sites
timthetinyhorse 0 Posted November 29, 2012 Stone - Use this instead: http://ifinterface.com/page/page3.php?langid=1 I've always found VAGCAT schematics to be a little crude (although perfectly useful). If you haven't got access to ETKA then the IFInterface system is def the way to go if you want clearer images. very good find that thanks Quote Share this post Link to post Share on other sites
fendervg 33 Posted November 29, 2012 They're still available - it's not a Corrado specific part. Quote Share this post Link to post Share on other sites
Stonejag 10 Posted November 30, 2012 They're still available - it's not a Corrado specific part. Is there another part number for them other than the 535* one then? Quote Share this post Link to post Share on other sites
Stonejag 10 Posted February 6, 2013 (edited) Finally got a chance to do some digging through ETKA at the dealership and ordered some Mk3 Golf bits on the offchance. They fit! You can use 321 867 299 B "clip" as an alternative to the obsolete Corrado part - they're nearly identical but made from uncoloured / white nylon instead of the black plastic used on the originals. I can finally stop my door cards flapping about! :cheers: Edited February 6, 2013 by Stonejag Quote Share this post Link to post Share on other sites
Portent 0 Posted February 6, 2013 Well played Sir! Quote Share this post Link to post Share on other sites
