Bazmcc 0 Posted January 10, 2013 I have the engineer on standby with a CNC mill and lathe and we're going to have a go at coming up with a solution to the crappy excuse for a clip on the bonnet pull where the cable attaches to the bracket. This is the standard clip both normal and broken. The gruven one looks like it does the job but involves drilling holes and i'm not sure i'm convinced by the design. Gruven make this one: So I'm going to try to come up with a very basic and easy to fit version. Any pics, suggestions or help is greatly appreciated. We might as well make a solution for it because it seems to be an all too common problem. Quote Share this post Link to post Share on other sites
Hofmiester 10 Posted January 10, 2013 Good man! I have no suggestions but when you solve it, I'll take one ;) Quote Share this post Link to post Share on other sites
dragon green 5 Posted January 10, 2013 Make it as close to the Gruvenparts one as possible, I've got one,and it works ! Quote Share this post Link to post Share on other sites
V-Dubstar 0 Posted January 10, 2013 $45 from Gruvenparts, bladdy hell!! Quote Share this post Link to post Share on other sites
owen g60 10 Posted January 10, 2013 I used an adjuster from a bicycle brake. The solder less nipple is there because the end broke off too. The adjuster is now bolted to the lever bracket using a little clamp I made. Quote Share this post Link to post Share on other sites
Goldie 2 Posted January 10, 2013 Im keen if you come up for with a decent solution.. Quote Share this post Link to post Share on other sites
owen g60 10 Posted January 10, 2013 Ill get some pics as mine stands now. Should be able to draw it up for an engineer to make if needs be. Quote Share this post Link to post Share on other sites
Bazmcc 0 Posted January 10, 2013 The idea will be something like that hopefully. But without the cable ties maybe. Quote Share this post Link to post Share on other sites
daves16v 1 Posted January 10, 2013 I was going to have a go at this a couple of years back but didn't get chance. If you need CAD help and/or manufacture give me a shout. Quote Share this post Link to post Share on other sites
GusPW 0 Posted January 10, 2013 Great! Id be up for one if it works. Quote Share this post Link to post Share on other sites
clumpy1 11 Posted January 10, 2013 Excellent I would have one about time someone done this:salute: The one on mine is as new but it still Dic*s about so good for you mate respect. Quote Share this post Link to post Share on other sites
Bazmcc 0 Posted January 11, 2013 Ok I think I have a design that will work well (the eureka moment). I need to take my bracket off and make a few measurements and then i'll put it into featurecam or else solidworks. Main criteria. It has to be modular so it can be easily removed or have parts replaced. No modifications will need to be made to the existing bracket. No modifications will need to be made to the existing cable. No welding or drilling will be required. There will be no sprung parts as they ultimately lead to fatique failure. Quote Share this post Link to post Share on other sites
tony_ack 0 Posted January 11, 2013 Watching with interest as I'm currently opening the bonnet by pulling the cable with a pair of mole grips. Quote Share this post Link to post Share on other sites
volksworld13 0 Posted January 11, 2013 work your majic!! im keen for 1 Quote Share this post Link to post Share on other sites
Stonejag 10 Posted January 11, 2013 Does the end of the cable just wedge into the gruven one? Was tempted way back when but couldn't stomach the price and ended up getting a new cable instead with the handle already attached... If it's just a lump of ally with two slots routed into it and two threaded holes for the setscrews then any decent machine shop could bang them out very easily. Stone Quote Share this post Link to post Share on other sites
Bazmcc 0 Posted January 12, 2013 There's a couple of issues I've spotted with the gruven one which isn't ideal. The way it fixes to the bracket isn't very good so we'll avoid that. As far as I'm aware it's a stepped slot where the cable surround goes in and the cable itself fits through the end. Quote Share this post Link to post Share on other sites
VAG-hag 0 Posted January 12, 2013 Id be well up for one too mate! Winner :) Quote Share this post Link to post Share on other sites
Bazmcc 0 Posted January 12, 2013 I think we have a decent solution now. I'll make it out of plastic at the start of the week if I get a chance. My mate said to call in with him as soon as I have a mock up or even measurements and a drawing and he'd cut it out on the mill. This should be able to be fitted without even taking the cable or bracket off the car. I'll update as soon as we have something I can show you all. Quote Share this post Link to post Share on other sites
Ruggy 10 Posted January 12, 2013 Sounds good, had no problem with mine but no doubt it's something that will go tits up in the future! Quote Share this post Link to post Share on other sites
Bazmcc 0 Posted January 12, 2013 You've just tempted fate. Lol. Quote Share this post Link to post Share on other sites
Ruggy 10 Posted January 12, 2013 Nah, I've got full faith in your solution!! Quote Share this post Link to post Share on other sites
Emkayvr6 0 Posted January 13, 2013 I'd been keen for one too if a good solution can be found as mine is bodged together at the moment. keep us posted Quote Share this post Link to post Share on other sites
sleeper16 0 Posted January 31, 2013 I have the engineer on standby with a CNC mill and lathe and we're going to have a go at coming up with a solution to the crappy excuse for a clip on the bonnet pull where the cable attaches to the bracket. This is the standard clip both normal and broken. The gruven one looks like it does the job but involves drilling holes and i'm not sure i'm convinced by the design. Gruven make this one: So I'm going to try to come up with a very basic and easy to fit version. Any pics, suggestions or help is greatly appreciated. We might as well make a solution for it because it seems to be an all too common problem. I made one a very simlar design to the gruven one not so long ago, i havnt fitted it yet as i need a new cable also. I will try and get pictures of it. The finish isnt amazing as i just wanted something that works rather than looks good. Quote Share this post Link to post Share on other sites
Bazmcc 0 Posted January 31, 2013 Exactly. Don't worry I haven't forgotten about this. I have a design drawn up rough so I'll get it done accurately next week and we'll cut up some metal. Quote Share this post Link to post Share on other sites
