Michael'durham' 10 Posted February 6, 2013 Afternoon gents What's the best headlight protection and foglight. Are there any plastic retro fit covers. Or do these thin films in various colours work?.... I promise that this will be my last post about lights.... :s Thanks Quote Share this post Link to post Share on other sites
Portent 0 Posted February 6, 2013 You can get clear hard plastic protectors. They do pop up for sale occasionally but they are quite rare. I'm not sure how well the film, such as Lamin-X, works but Riley on here sells it. Quote Share this post Link to post Share on other sites
Michael'durham' 10 Posted February 6, 2013 Yes it's the Lamin-X that I've seen, it will be interesting to know if anyone else has experience with it ---------- Post added at 4:35 PM ---------- Previous post was at 4:15 PM ---------- Just found this link. http://www.gbdriver.co.uk/headlight-covers/headlight-covers-headlamp-glass-protectors?products_id=17:393d73546dc65c0a2111c30f15758553 Quote Share this post Link to post Share on other sites
owen g60 10 Posted February 6, 2013 I'm sending a set of plastic covers off for moulding soon. Going to start a group buy to gauge interest first. Quote Share this post Link to post Share on other sites
Abdul 0 Posted February 6, 2013 Plastic covers look frickin ugly, like bonnet bra's. Get laminx, you get a nice glossy finish so your lights looks less aged too. Quote Share this post Link to post Share on other sites
P3rks 11 Posted February 6, 2013 I've never seen the plastic protective covers on a Corrado before!? Any Photo's? Quote Share this post Link to post Share on other sites
owen g60 10 Posted February 6, 2013 Clear ones. Tinted ones. I believe there was also a yellow set available... Not been able to source them however. Quote Share this post Link to post Share on other sites
Portent 0 Posted February 6, 2013 http://the-corrado.net/showthread.php?76608-PICS-ADDED-Headlight-protectors-(Ex-group-buy)-coil-pack-boot-lid-bumpers-etc&highlight=protectors Quote Share this post Link to post Share on other sites
clumpy1 11 Posted February 6, 2013 I'm sending a set of plastic covers off for moulding soon. Going to start a group buy to gauge interest first. Good idea mate i would be interested if sensibly priced. Quote Share this post Link to post Share on other sites
owen g60 10 Posted February 6, 2013 I'm hoping if interest is good enough a price between £25 and £35 Quote Share this post Link to post Share on other sites
Portent 0 Posted February 6, 2013 I'd be interested at that price. Quote Share this post Link to post Share on other sites
clumpy1 11 Posted February 6, 2013 I'm hoping if interest is good enough a price between £25 and £35 Sound's good keep me in mind cheer's. Quote Share this post Link to post Share on other sites
Michael'durham' 10 Posted February 7, 2013 I'm hoping if interest is good enough a price between £25 and £35 Count me in please, top of the list. Might have a couple of sets. Did you say your getting them specially made? I might get the fogs done yellow with Lamin-x and the indicator bits clear... Does a done know if the Lamin-x is easy removed? It it just a sticker? Quote Share this post Link to post Share on other sites
Riley 0 Posted February 7, 2013 Hi Michael, Our light protection films were developed for Leman racing/classification (Yellow) and protection, so they are race proven over many years. They are adhesive backed for easy fitment and removal should you require. Our product is very, very different to a sticker or graphics vinyl. You can actually request any samples at: http://www.Lamin-X.co.uk/samples.htm which will allow you to get a look/feel of the product. There are basic fitting instructions/guides etc on the downloads page too. As an example, to protect both Corrado headlight faces, the product cost would be just £15.99. I don't want to step on Owen's toes so obviously I'd like anyone to make their own decision on product choice, and he's a good lad, I'm just adding a little info regards our product. In fact we have had many members of the general public fit our light protection onto plastic/perspex/plexi covers. I hope that helps. :thumbleft: Quote Share this post Link to post Share on other sites
Michael'durham' 10 Posted February 7, 2013 Hi Michael, Our light protection films were developed for Leman racing/classification (Yellow) and protection, so they are race proven over many years. They are adhesive backed for easy fitment and removal should you require. Our product is very, very different to a sticker or graphics vinyl. You can actually request any samples at: http://www.Lamin-X.co.uk/samples.htm which will allow you to get a look/feel of the product. There are basic fitting instructions/guides etc on the downloads page too. As an example, to protect both Corrado headlight faces, the product cost would be just £15.99. I don't want to step on Owen's toes so obviously I'd like anyone to make their own decision on product choice, and he's a good lad, I'm just adding a little info regards our product. In fact we have had many members of the general public fit our light protection onto plastic/perspex/plexi covers. I hope that helps. :thumbleft: Sounds fantastic, thank you for taking the time to explain and include a link. I'd like to sort out the fog and indicators out with protection. Quote Share this post Link to post Share on other sites
Michael'durham' 10 Posted February 20, 2013 Bump Quote Share this post Link to post Share on other sites
Riley 0 Posted March 19, 2013 [ATTACH]72561[/ATTACH] I went French. Thanks to Riley for the Lamin-X Glad you are happy with the product Michael :thumbleft: Happy to be of service. A video of our new Amber (If it works) and I take full responsibility for the music lol.:smug: https://www.facebook.com/photo.php?v=460133034057965&set=vb.274957172705&ty pe=3&theater Neil. Quote Share this post Link to post Share on other sites
